Home › Archive › DoW

DOW-UAP-D149 — AAWSAP DIRD, MHD Air Breathing Propulsion and Power for Aerospace Applications, November 2010

File DOW-UAP-D149 is a declassified pdf from Department of War, recording an incident dated 11/21/10 at Las Vegas, Nevada, published in Release 06 (2026-09-18). This page carries the original file, its official summary and its full text.

File
DOW-UAP-D149
Agency
Department of War
Incident date
11/21/10
Location
Las Vegas, Nevada
Released in
Release 06 (2026-09-18)
File type
PDF

Topics: AAWSAP & DIRDs

This document is a Defense Intelligence Reference Document (DIRD), a technical reference format used by the Defense Intelligence Agency (DIA) to capture baseline knowledge on a specific topic for later analytic use. DIRDs are best understood as reference and synthesis products rather than as original research. It is one of 38 DIRDs produced under the Advanced Aerospace Weapon System Applications Program (AAWSAP) between 2009 and 2011. Because AAWSAP’s scope permitted a broad range of supporting topics, not every DIRD in the series directly concerns aerospace systems or future threat assessment. The following summary reflects the DIRD’s scope and framing at the time of writing and should not be read as implying current validation of the concepts discussed.

This DIRD surveys magnetohydrodynamic (MHD) and plasma-based concepts for air-breathing propulsion, onboard power generation, and aerodynamic control, arguing that such systems could in principle extend aerospace performance beyond the limits of conventional chemical propulsion and control surfaces. The report reviews concepts including MHD acceleration, flow control, inlet control, onboard power generation, drag reduction, and plasma-generated “virtual” aerodynamic surfaces, while giving particular attention to hypersonic applications such as scramjet power extraction, reentry vehicles, global-strike gliders, and aero-assisted orbital maneuvers. However, it emphasizes major practical constraints, especially extreme power requirements, system weight and complexity, and the difficulty of achieving useful ionization in colder air at lower hypersonic speeds; on that basis, it argues that Ajax-style MHD bypass concepts, in which energy is extracted from the airflow upstream and reintroduced downstream through an electromagnetic system, are not meaningful below about Mach 12, while treating the “virtual cowl” and related reentry applications as more plausible. The document presents plasma and MHD aerospace systems as a technically serious but highly demanding field whose nearer-term promise lies in specialized hypersonic control, power generation, and reentry applications rather than a fully realized air-breathing propulsion system.

Open original file · WAR.GOV page

TL;DR

They said Ajax won’t work below Mach 12—guess even myths need speed limits.

  • DIRD D149, DoW, Nov 2010, Las Vegas NV
  • Surveys MHD/plasma air-breathing propulsion, hypersonic focus, power/weight limits
  • Near-term promise limited to hypersonic control, power, reentry

AI summary

A classified defense document titled "MHD Air Breathing Propulsion and Power for Aerospace Applications," issued on 21 November 2010, discusses propulsion concepts using plasmas and magnetohydrodynamics, including electric and chemical propulsion systems, plasma thrusters, and MHD interactions. It covers various propulsion technologies such as electrothermal, electrostatic, and electromagnetic thrusters, along with power sources and performance metrics. The document explores MHD propulsion, plasma actuators, scramjet applications, and ionization techniques for cold-air MHD devices. It mentions Lockheed Martin's experiments and AIAA's 2009 technology list, as well as applications like MHD energy bypass, orbit inclination changes, and hybrid chemical/MHD propulsion. The text includes endnotes referencing technical papers and reports from 2001 to 2009.

Full text

Page 2

UNCLASSIFIED//,FAR OliliiliGili,t.L W&E 8HL'f

MHD Air Breathing Propulsion and Power for

Aerospace Applications

The Defense Intelligence Reference Document provides nonsubstantive but auLhoritaLive reference
information related to intelli ence to ics or methodolo ies.

Prepared by:
Technology Warning Division (OWO-4)
Defense Warning Office
Directorate for Analysis
Defense Intelligence Agency
Authors:

AAP Person 86, AAP Person 87

(U) COPYRIGHT WARNING: Further dissemination of the photographs in this publication is not
authorized.
This product is one of a series of advanced technology reports produced in FY 2010
under the Defense Intelligence Agency, Defense Warning Office's Advanced
Aerospace Weapons System Applica tions (AAWSA) Pr ogram, Comments or gue~tions
pertaining t o this document should be addressed to ._!AA
_ P_P,.,,e,,,,,
rs,,,,,o.,..
n....,1,.,..,.,,..,..,,,.__,,,..,,.,.,,..,.,.~J
AAWSA Program Manager, Defense I ntelligence Agency, ATTN : JUIAF - DI/DW0-3,
Bldg 6000, Washington D.C. 20340- 5100

ii

UNCLASSIFIED//f8R: err101,,L Wili Qtlb¥

Page 3

UNCLASSIFIED/ /FOR OFFICIAL USE ONLY

Contents
SUMMARY ................ ........................................................................,..... iv
Chapter 1: CONCEPT OVERVIEW ............................................................ 1

Weakly Ionized Plasmas for Propulsion Applications ....................... 2
Electric Propulsion Systems .................. ....................................,...... 5
Chapter 2: AERONAUTICAL APPLICATIONS .................................. ...,.... 11
Basic Principles of Magnetohydrodynamics and Requirements for
MHD Performance ......................................................................... 11
Nonequilibrium MHD in Cold Ai r Flows........................................... 13
The Ajax Concept: MHD Bypass .................................................,.... 15
The Reverse Energy Bypass................... ........................................ 18
MHD Applications to Reentry and Near-Orbital Flight ................,.... 20
Chapter 3: SPACE APPLICATIONS ........................................................ 23

Chapter 4: SUMMARY AND PREDICTIONS ........................................ .... 25
Chapter 5: ENDNOTES ......................................................................... 26

Figures
Figure 1. Electrothermal Arcjet Thruster.................................................7
Figure 2. Electrostatic Gridded Ion Thrusters................................... ......8
Figure 3. Field Orientation for Hall Field Systems and PS Hall
Thruster. ....................................................................................
8
Figure 4. Electromagnetic Accelerator Field Configuration and SelfField Electromagnetic Spacecraft Thrusters.......................................9
Figure 5. Air-Breathing MHD Engine.................................................,.... 10
Figure 6 . MHD Control of Scramjet Inlet Using E-Beam Ionization. ....... 15
Figure 7. Schematic of Ajax Hypersonic Vehicle Concept...................... 16
Figure 8. The Reverse Energy Bypass Concept.. .................................... 19
Figure 9. Schematic of the Virtual Cowl Concept................................... 20
Figure 10. Reentry Vehicle with Surface-Integrated MHD Device and
Plasma-Enabled Vi rtual Streamlining and L/D Increase...............,.... 21
Figure 11. Electrothermal Arcjet Thruster on Satellite.......................... 23
Figure 12. SP- 100 Space Nuclear Power System................................... 24
Figure 13. Nuclear Electric Propulsion (NEP) Concept Vehicles.........,.... 24
, 1, • • • • •

iii

UNCLASSIFIED//FOR OFFICIAL USE ONLY

Page 4

UNCLASSIFIED/ /FOR OFFICIAL tt.!l!! 8HLY

MHD Air-Breathing Propulsion and Power for
Aerospace Applications
Summary
The paper reviews novel propulsion concepts utilizing plasmas (ionized
gases) and magnetohydrodynamics (MHD). These concepts are shown to
be attractive due to their potential to achieve propulsion and
aerodynamic performance far beyond current conventional technologies.
However, significant difficulties impede the development and application
of these technologies; these include weight, complexity, higher power,
and the need for complex and energy-consuming artificial ionization in
"cold" air (at Mach <12).
A well-publicized Ajax concept of MHD energy bypass has been shown to
be meaningless below at least Mach 12. In contrast, a new "reverse
energy bypass" with Virtual Cowl is potentially practical for air­
breathing hypersonic vehicles.
Applications of the Virtual Cowl and other plasma/MHD devices to
reentry, global-strike hypersonic gliders, and aeroassisted orbital
maneuvering are identified as promising in the near future. The ability of
a plasma/MHD system to generate high power onboard and to provide
L/D (lift-to-drag ratio) far beyond that possible conventionally makes
these applications both feasible and desirable for national defense.
However, these applications are also likely to be implemented by
nations such as China, Japan, and Russia.
The outlook for uses and applications of MHD propulsion could increase
dramatically if high-speed (hypersonic) vehicles begin to carry powerful
onboard electricity sources, such as nuclear (fission or fusion) reactors.
For spacecraft, the current trend of replacing chemical rockets with
electric propulsion systems will continue and is likely to become the
standard. Electric systems can provide a much wider range of operation
(e.g., low-thrust fine positioning/pointing, more frequent or
nontraditional maneuvers, and longer times on station) than chemical
systems can.

iv

UNCLASSIFIED/ {FOR AEEIClil.la WSE 8HL I

Page 5

UNCLASSIFIED/ /FOA QFFI@IAL tt91!! 8flt I

Chapter 1 : Concept Overview
A flight vehicle's speed and altitude limit its available propulsion options.
Traditional air-breathing systems (propeller, turbofan, and turbojet) are typ ically
limited to altitudes below 80,000 feet. The existing and planned high-altitude
vehicles utilize either high-speed propulsion with ramjet and scramjet engines or
slow-speed systems with large propellers. Chemical rockets can operate at all
altitudes but have limited burn times and require both fuel and oxidizer to be
carried onboard.
High-speed air-breathing propulsion, based on ram/scramjet engines, have well­
known difficulties: external and internal flow compression and shock control;
shock-shock and shock-boundary layer interactions in the propulsion flowpath;
mixing, ignition, and flameholding in the combustor; incomplete combustion and
chemical energy release; and very high temperatures and wall heat fluxes in the
combustor. There are limits to what can be done about these problems with
conventional technologies, which is why the use of plasma (ionized gas) with or
without electric and magnetic fields can offer additional opportunities for control
and propulsion enhancement.
Onboard generation and storage of electric power is one of the main problems
encountered with respect to high-altitude, high-speed flight. Hypersonic vehicles,
both air-breathing and unpowered reentry "gliders," have no rotating
turbomach inery to which an electrical generator could be connected. An
attractive power option can be offered by magnetohydrodynamic (MHD) devices.
For example, placing an MHD generator immediately downstream of a scramjet
combustor can, given the high velocities and temperature of the flow and with
metallic additives to the fuel, provide high power (from tens of kW to several
MW) with no moving parts. For reentry vehicles, both external (i.e., surface­
integrated) and internal-duct MHD generators can generate high power also
without moving parts. Employing additional equipment like electrical generators
imposes a weight penalty that must be optimized with vehicle performance.
The use of electric and magnetic systems can open new potential areas for
aerospace propulsion. While chemical energy sources are limited by the energy
available for particular reactions and are limited to operating conditions that are
conducive to combustion, electromagnetic energy can be added to the flow over
a much wider range of operating conditions. For example, at very high altitudes
(>150 kft), it is difficult to get reliable combustion in hypersonic air-breathing
engines. In an electrothermal system, the combustor would be replaced with an
electrical heating source that can easily and reliably add enthalpy to the flow
even at low pressure. The flow can also be accelerated by manipulating body
forces ( electric and magnetic) on charged particles (ion and electrons) within the
flow.
Outside the atmosphere, we note that operation in space almost always requires
rocket propulsion whether it be chemical, electric, or nuclear. The exceptions
would be sails and tethers. Spacecraft are rapidly transitioning from chemical
rockets to electric (plasma) for most space-based operations.1 The higher
specific impulse (lsp) available for electric systems (2 to 100 times that of
chemical) has a dramatic impact on the vehicle design and operation. Although

1

UNCLASSIFIED/ FOR OFFICIAL t,91!! 8HLY

Page 6

UNCLASSIFIED/ /FAA QFFl&IsTiL ~SI! 8flt I
electric (plasma) thrusters have been around for decades, their use in space was
limited by the electric power available onboard the spacecraft. 2 The advent of
high-power solar arrays has made systems from a few kW to tens of kW
practical. Chem ical systems will probably always be the primary choice for
getting vehicles into space. The thrust levels for electric systems are too low to
be practical for that purpose.
Chemical and electric (or electromagnetic) propulsion systems have intrinsic
differences. For example, chemical propulsion is "energy limited" because the
chemical reactants have a finite amount of energy per unit mass (i.e., their
enthalpy of combustion or reaction), which ultimately limits their ach ievable
exhaust velocity. However, because the propellants are their own energy source,
the rate at which energy is supplied to the propellant (which is ultimately limited
by the reaction kinetics) is independent of the mass of propellant, so very high
powers and thrust levels can be achieved. By contrast, electric propulsion
systems are typically not energy limited; an arbitrarily large amount of energy
can be delivered (from the external solar, nuclear or chemical power system) to
a given mass of propellant so that the exhaust velocity can be an order-of­
magnitude larger than that of a chem ical system . Instead, electric propulsion
systems are "power limited" because the rate at which energy from the external
source is supplied to the propellant is proportional to the mass of the power
system. This has the result of limiting the thrust of the electric propu lsion system
for a given vehicle mass. Because of this, electric propulsion vehicles are
typically low thrust-to-weight (T/W) ratio (i.e., low acceleration) vehicles.

WEAKLY IONIZED PLASMAS FOR PROPULSION APPLICATIONS
This review is devoted to a group of emerging technolog ies centering on weakly
ionized plasmas for propulsion and power. 3 Charged particles (ions and
electrons) must be present in the flow so that it can interact with applied electric
and magnetic fields. Space thrusters operate at very low pressures ( < 100 mTorr
or < about 2 psi) with a significant fraction of the working fluid/gas being
partiall y ionized (from a few percent to nearly 100 percent) . In contrast, air­
breathing systems operate at much higher pressures and have low ionization
fractions. The ionization fraction of concern (i.e., the fraction of gas molecules
that are ionized) ranges from as low as 10-s to 10- 2 , hence the term " weakly
ionized." The gas pressure in the plasmas can take almost any value. In
applications to high-altitude flight, the static pressure is on the order of 10-100
Torr, whereas combustion applications demand near-atmospheric ( ~760 Torr) or
above-atmospheric pressures. The temperature of the gas can be near-ambient
in low-pressure glow discharges, rising to 5,000-10,000K in arc or high-pressure
microwave discharges, or even 20,000-30,000K in laser-generated sparks. The
plasmas can be generated by electric or electromagnetic fields, from DC to RF,
short pulses, microwaves, and optical (laser) beams, or by various combinations
of the above. In general, low pressure plasmas tend to be uniform (diffuse) and
nonequilibrium. The temperature of electrons and internal molecular modes can
be very high, while the gas as a whole stays relatively cold. As the pressure and
power loading increase, plasmas tend to become hotter, getting closer to
thermal equilibrium, and also break into channels (streamers and arcs). The
reality, however, is more complex. In some devices, such as dielectric barrier
discharges, nonequilibrium plasmas are generated even at atmospheric pressure,
2

UNCLASSIFIED/FQA &FFIElsllL ~SE et•t I

Page 7

UNCLASSIFIED/ /FOR 8ffl@IAL tt.!l!! er•t t
and in devices such as t he gliding arc, the plasma evolves from near-equilibrium
to highly nonequilibrium during each of the per iodically repeating cycles. In
shock and boundary layers during reentry, the plasma is near therma l
equ ilibrium while being diffuse. The primary reason for this behavior is that the
ionizat ion in those shock and boundary layers exists without any electric field
and thus is not subject to arcing instabilities.

Plasma Features
What feat ures or properties make weakly ionized plasmas interesting for
propu lsion and aerodynam ic applications? The most obvious feature is heating - a
consequence of Joule dissipation in an electrically conducting medium placed in
an electric field. As a heating element, plasma has important advantages
compared with conventional heaters. For example, even a surface electric
discharge can effectively heat t he gas flow much farther from the wall than a
wall-imbedded convent ional heater would. Microwave and laser beams can
create plasmas and heat the gas even far from any surfaces, and the volume and
shape of the heated region can, in principle, be adjusted. Since heated regions
can significantly alter the flow by making the gas flow mostly around them,
plasmas can form switchable, controllable, and tunable virtual bodies or
surfaces. Such virtua l surfaces can be deployed on demand for drag reduction,
aerodynamic control (when app lied asymmetrically), and optimization of engine
inlet performance, to name a few. It is the localized and transient deployment of
plasma virtual surfaces that results in the most interesting and complex
interactions with gas flows while saving energy compared with large -volume,
steady-state plasma utilization, and thus is especially promising for applications.
Another useful application of plasma heating is ignit ion . This may seem triv ial;
after all, spark plugs in conventional internal combustion engines are well­
developed thermal plasma devices . However, therma l plasma ignition for
scramjet eng ines is not that simple, since the ign it ion system would have to
prevent the plasma from being easily blown away by the supersonic flow, and
even if this problem is resolved, if not properly (and qu ite ingeni ously) designed,
the igniter would cause an unacceptably strong perturbation to the flow and loss
of the stagnation pressure and wou ld require extremely high power. As an
example, plasma igniters based on subcritical microwave discharges are quite
sophisticated .
Besides heating, the presence of charged particles is another obvious, and very
important, feature of plasmas. Charged particles can be act ed upon by electric
and magnetic fields, and this action can be transferred to the bu lk gas by ion­
molecule collisions. Thus, magnetohydrodynamic (MHD) and
electrohydrodynamic (EHD) interactions can be ut ilized to exert forces and to
decelerate or accelerate the gas in both inviscid core flows and viscous boundary
layers. The magnitude of such interactions depends on the ionization fraction and
the magnetic or electric field strength.

MHD Interactions
The ionization fraction can be quite high in shock and boundary layers at very
high Mach numbers (such as those in reentry flight), or just downstream of
3

UNCLASSIFIED) POI\ OFF!el»!CL tt.!l!! 8HLY

Page 8

UNCLASSIFIED/ /FOA QFFl&IJT.tk WSE 8HLV
ram/scramjet combustors if alkali vapor is added to the gas. In those regions,
MHD interactions can be promising for electric power generation or acceleration
of the flow, as well as for flow control. However, at Mach numbers below about
12 (and excluding the combustor or the region just downstream of it), the air is
too cold for a significant thermal ionization even with alkal i seeding. The required
level of ionization then has to be created and sustained by nonequilibrium
(nonthermal) means and is associated with a very substantial power budget and
additional heating. Therefore, the efficiency of ionization (which can vary by
orders of magnitude depending on the particular means of ionization) is of first­
order significance for the entire operation and efficiency of the device. Energy
used to ionize and excite the gas molecules can be considered as loss in the
system since this energy is rarely recovered in the form of directed kinetic or
thrust energy. Note that in this regard, ionization by high-energy electron beams
or by repetitive high- voltage nanosecond pulses are promising as the most
energy-efficient means of nonequilibrium ionization. 4 , 5 , 6 , 7
Even with the most efficient ionization techniques, the power budget and
additional heating associated with the ionizer normally limit the achievable level
of ionization. To have a substantial MHD effect, 8 • 9 one has to either use a very
strong magnetic field (which is associated with some practical issues) or use the
MHD interaction in a localized and transient regime (e.g., for boundary layer
control).
As for EHD interaction, 10 , 11 it relies upon non-neutral ity of the plasma and an
electric field to impart momentum to the gas. Although EHD (or "ion wind")
phenomena have been known for many years, the last several years saw a surge
of new interest to this type of interaction. This new boom is due to the
asymmetric dielectric barrier discharge (DBD)-a remarkably simple device that
has been demonstrated to be very effective in delaying and controlling flow
separation and perhaps even laminar-turbulent transition. Although details of the
physics of DBD plasma actuators are still incompletely understood, the simplicity
of these devices, their low power consumption, and the striking effectiveness in
separation control bring these systems to the top of the list of plasma
aerodynamics and plasma-assisted propulsion technologies that have near-term
application prospects.

Combustion
Another area where nonequilibrium (nonthermal) weakly ionized plasmas are
very promising is plasma-assisted combustion. Although heating induced by
plasmas can ignite combustible mixtures, as mentioned above, it is the presence
of "hot" electrons in a cold gas that makes nonequilibrium plasmas quite
interesting for promoting chemical processes such as combustion . Electron­
impact dissociation, excitation, and ionization of molecules can generate
chemically active species such as radicals and excited atoms and molecules, and
those species can initiate or accelerate chemical reactions that would otherwise
be nonexistent or slow at low temperature. A number of novel techniques,
including (but not limited to) high-voltage nanosecond pulses and the so-called
"gliding arc" have been shown to be quite effective in plasma-assisted
combustion . Investigation of detailed mechanisms (often quite complex and

4

UNCLASSIFIEDtFAR AliFiUi1Ak WSE 8HLY

Page 9

UNCLASSIFIED/ /POR. OPPl@IAL ~SI! OHL¥
nontrivial) of the coupled physical and chemical processes in those plasmas can
potentially lead to their better understanding and help them become practical.

ELECTRIC PROPULSION SYSTEMS
Electric propulsion thrusters can be divided into three categories: electrothermal,
electrostatic, and electromagnetic. First, electrothermal thrusters use electric
energy to directly heat the propellant and add enthalpy. The heated gas is then
accelerated using a conventional converging-diverging gas-dynamic nozzle.
Second, electrostatic thrusters use applied static electric fields to accelerate
propellant ions via body forces. Third, electromagnetic thrusters use
electromagnetic body forces (ExB) to accelerate a plasma (positive and negative
charges). An electric propulsion system consists of a power source (e.g., solar or
nuclear), power conditioning electronics, engine/thruster (including inlet for air­
breathing systems), and fuel/propellant storage and feed subsystem.
Energy can be obtained from sunlight, a nuclear reactor, or chemical sources. In
the case of solar electric propulsion (SEP), solar photons are converted into
electricity by solar cells. The energy could also be beamed to the vehicle using
laser or microwave sources. Beaming the power allows for higher power
densities but with the added complications of needing a power station and a
means of getting the power to the vehicle (direct illumination or via a relay
system). In nuclear electric propulsion (NEP), thermal energy from the nuclear
reactor is converted into electricity by either a static or dynamic thermal-to­
electric power conversion system. Static systems have the advantage of no
moving parts for high reliability, but they have low efficiency; dynamic systems
have moving parts (e.g., turbines and generators) and do not scale well for small
systems, but they do have higher efficiency. Other onboard energy storage
systems such as high-density capacitors, flywheels, or fuel cells could be used.
Power conditioning systems are required to convert the power system voltage to
the form required by the electric thruster. For example, an SEP power system
produces low-voltage DC (typically ~l00V); this would need to be converted (via
transformers, etc.) to kilovolt levels for use in an ion thruster. The power­
conditioning system is often referred to as the power processing unit (PPU); this
is, in turn, part of the vehicle's overall power management and distribution
(PMAD) subsystem.
Various combinations of thruster and propellant are possible, depending on the
specific application. The propellant or working fluid can be either stored on board
and used in a rocket mode or collected from the atmosphere in an air-breathing
mode. The natural system-level trade between these propellant methods is
fuel/propellant mass versus power system mass. Air-breathing systems require
less propellant mass but require higher energies to perform similar missions.
Although rockets will operate in a space or air environment, t heir thrust
durations are limited by the amount of propellant that can be carried.
Key performance parameters determine the relative strengths and weaknesses
of different propulsion technologies. The fuel/propellant efficiency is
characterized by the specific impulse (Isp) for rockets and by the thrust-specific­
fuel-consumption (TSFC) for air-breathing systems. It is a measure of how much
5

UNCLASSIFIED}liOA OFFl&IPdE W&E 8HLY

Page 10

UNCLASSIFIED/ /FAR OFFICI C Is. W&i e .. tv
thrust (Fth) is produced from each mass unit of propellant. The thrust efficiency
(ll ) is a measure of how much of the power/energy that is available results in
directed kinetic energy (thrust power) in the flow. The thrust density is a
measure of how much thrust is produced per unit cross-sectional area, Ac (area
perpendicular to the flow direction). Although the thrust density is a packag ing
issue for spacecraft, it is critical for air vehicles where drag is present. The
thrust-to-power measures the acceleration efficiency. Traditiona lly a trade exists
between fuel/propellant efficiency and thrust-to-power (speed vs. economy). The
fina l parameter is the specific mass or weight (mass)-to-power ratio. In most
cases the efficiencies improve with the size of the system (economy of scale).
Measures of performance are fundamenta lly different between air-breathing and
rocket systems due to the inlet on the air-breathing system .
Air-Breathing

Rocket

FIB = m, ue - m(/ u

+ A e (Pe - panil )

= ,,;J(l +f)u.- u] + A. (P. - P anti )

Thrust

l sp - - - - - - - - - - -

propeJlant weight flo w rate
F,h

=

I SP -=

Thrust
= _
fuel weight flow rate

F....=
lh' - -

u cq

=

0

o o

m, g o

fuel mass flow rate __ mJ

TSFC = - - - - - Thrust

F111

.

p jel

= 1/2 m, u;q = 1/2 F,1, I SP 8 0

.
1] =

½ ·er
P,,/ect

= F,h l sp 8 0 _ 112 m, u;q

2 P,,,,cr

P ,/ec,

p
1]

= ___!!!_
P e,ec/

1/2 ( ,,;, u;q
=

_,,;au 2)

- - - ' - - - - --'--

P,,,c,

Above, m0 is the mass flow rate of the air, mI is the mass flow rate of the fuel,

m, is the exit flow rate, go is the acceleration of gravity (reference po int, Earth),
Ue is the nozzle exit velocity, u is the flight/vehicle velocity, Ueq is the equivalent
exit velocity, Ae is the nozzle exit cross -sectional area, Pe is the nozzle exit
6

UNCLASSIFIED/Peft. err1e1111t ~9E 8,.L?/

Page 11

UNCLASSIFIED/ /POI\ orr1e1At WSE 8Ptk¥
pressure, Pamb is the ambient/environmental pressure, Pj et is the jet-kinetic
power (thrust power) produced by the engine, and P eiect is the electrical (or other
external source) power supplied to the propulsion system. For air-breathing
systems the mass flow rate of the fuel is very small relative to the mass flow
rate of the air.
Note that an air-breathing system can never fly faster than its exhaust velocity.
Rockets, because they carry an onboard oxidizer, do not have this restriction
and, therefore, have no flight-speed limits. The jet power for high-speed air­
breathing engines is larger than the equivalent jet power for a rocket due to the
inlet and is the difference of two large numbers.
Large power levels are required for aircraft and launch vehicles . For example, an
SR-71 cruising at Mach 3.2 produces a thrust of 24,700 lbf (110 kN) and a jet
power of 104 MW. Climb and maneuver thrust is much higher. Similarly, an RL10
rocket eng ine produces 15,000 lbf (66.7 kN) thrust at an l sp of 433 seconds, and
has a jet power of 142 MW. By comparison, a Nimitz class nuclear aircraft carrier
propulsion system is 194 MW, and the Hoover
dam produces about 2000 MW. Therefore, any
electric system replacing these applications must
be capable of processing a lot of power.
Spacecraft propulsion systems are typically
hundreds of watts to tens of kW. This, in addition
to powerplant weight issues, is a primary reason
why electric propulsion systems are currently
being used on spacecraft and not on aircraft.
Historically, electric thrusters for spacecraft were
available for flight decades before the power
systems. 12

Figure 1. Electrothermal Arcjet
Thruster. Photograph of a 30-kW
arcjet thruster being tested at the
Jet Propulsion Laboratory .13

7

UNCLASSIFIED/f8R 8ffl@lsld:. WSE 8Ptklf

Page 12

UNCLASSIFIED/ /FOR 055iliCl.t.k WSE 8HL'f
Electrothermal thrusters use electric energy to
heat the propellant and add additional enthalpy.
This can be done with simple resistive heating or
by passing the propellant gas through an arc
plasma discharge. The plasma can be generated
through a high-current discharge or by
absorption of microwaves. The hot pressurized
gas is then accelerated out of the thruster using
a conventional converging-diverging gas-dynamic
nozzle. An example of an electric arc heated
thruster or arcjet thruster is shown in Figure 1.
Figure 2. Electrostatic Gridded
Ion Thrusters. Photo-

Electrostatic thrusters use an applied static
graph of a gridded 30 cm diam ­
electric field to accelerate propellant ions. Strong eter ion thruster being tested at
electric fields are created in the engine which
the Jet Propulsion Laboratory . 14
then accelerate the (positive) ions to high velo­
cities. The accelerating field can be applied using physical grids such as those
used in ion engines or using "virtual grids" generated by an applied magnetic
field that traps the electrons as is done in Hall-effect thrusters. A photograph of
the NASA ion engine used on the Deep Space One spacecrah is shown in Figure
2. While gridded electrostatic thrusters like ion thrusters are capable of very high l sp (1,000 to >20,000 seconds) values they have very low
thrust densities ( 1-5 N/m 2) due to the space-charge current limit in the
accelerator system. Hall -effect thrusters do not have this space-charge limit but
also have thrust density limits due to the annular geometry (tens of N/m 2).
Typical power levels are from watts to 50 kW.
In the Hall field orientation, the electric field causes electrons to flow upstream
and the ions to drih toward the exhaust as shown in Figure 3. 15 The electrons
and ions transfer equal and opposite amounts of momentum to the air, resulting
in zero thrust when no magnetic field is present. However, with the application of
a transverse magnetic field, the forward flow of electrons is slowed while the ah
flow of ions is nearly unaffected. Consequently, there is a net momentum
transfer resulting in thrust on the vehicle.

Hall Field
Orientation
E

Figure 3. Field Orientation for Hall Field Systems and PS Hall Thruster. Left: Figure
shows the Hall field orientation. Right : PS Hall Effect thruster being tested at the University of
Michigan.

8

UNCLASSIFIEDff8fl 8ffl@IIIIL ~BE 8HLY

Page 13

UNCLASSIFIED/ /FOA OFFl&IAk WSE 8HLV
Electromagnetic thrusters use electromagnetic body forces (ExB) of Lorentz
force to accelerate a propellant plasma as shown in Figure 4. 16 , 17 The electric
field is applied using electrodes within the thruster. The Lorentz or ExB force
accelerates both positively charged ions and negatively charged electrons or
negative ions in the same direction. The magnetic field can either be applied
externally (applied field thruster) or generated by a very high current (typically
thousands of amps) plasma discharge (self-field thruster).

Text continues in the original file (32 pages).

Previous: DOW-UAP-D148 — AAWSAP DIRD, Detection and High-Resolution Tracking of Vehicles at Hypersonic Velocities, November 2010 · Next: DOW-UAP-D150 — AAWSAP DIRD, Quantum Computing and Utilizing Organic Molecules in Automation Technology, December 2010

Same topic: title & summary match

Same location: Las Vegas, Nevada

Same period: 2010

Same release: Release 06

Same agency: DoW