Home › Archive › DoW

DOW-UAP-D125 — AAWSAP DIRD, Inertial Electrostatic Confinement Fusion, March 2010

File DOW-UAP-D125 is a declassified pdf from Department of War, recording an incident dated 3/10/10 at Las Vegas, Nevada, published in Release 06 (2026-09-18). This page carries the original file, its official summary and its full text.

File
DOW-UAP-D125
Agency
Department of War
Incident date
3/10/10
Location
Las Vegas, Nevada
Released in
Release 06 (2026-09-18)
File type
PDF

Topics: AAWSAP & DIRDs

This document is a Defense Intelligence Reference Document (DIRD), a technical reference format used by the Defense Intelligence Agency (DIA) to capture baseline knowledge on a specific topic for later analytic use. DIRDs are best understood as reference and synthesis products rather than as original research. It is one of 38 DIRDs produced under the Advanced Aerospace Weapon System Applications Program (AAWSAP) between 2009 and 2011. Because AAWSAP’s scope permitted a broad range of supporting topics, not every DIRD in the series directly concerns aerospace systems or future threat assessment. The following summary reflects the DIRD’s scope and framing at the time of writing and should not be read as implying current validation of the concepts discussed.

This DIRD surveys inertial electrostatic confinement (IEC) fusion, a relatively unconventional fusion concept that uses electric fields rather than the more established magnetic or laser-based approaches to confine ions, and it reviews both the underlying physics and the experimental work associated with the concept. The report emphasizes that IEC may have nearer-term value as a compact neutron, proton, or x-ray source and as a platform for studying experimental fusion approaches, while also presenting more ambitious possibilities such as aneutronic power generation and propulsion applications. At the same time, it makes clear that the concept remained far from practical fusion power, with experimental devices operating several orders of magnitude below breakeven and with major unresolved issues involving confinement, losses, grid damage, and scale-up. Overall, the document treats IEC as a technically interesting but still highly speculative path toward fusion energy, while suggesting that its more limited spin-off applications were more plausible in the near term than its long-range power generation or propulsion applications.

Open original file · WAR.GOV page

TL;DR

Vegas may have glitter, but its fusion still can’t break even.

  • DIRD, Defense Intelligence Agency, March 2010, Las Vegas, Nevada
  • Surveys inertial electrostatic confinement fusion physics, experiments, and speculative applications
  • Concept remains far from practical power; near-term neutron source more plausible

AI summary

A classified document titled "Inertial Electrostatic Confinement Fusion" prepared by the Defense Intelligence Agency in March 2010 outlines the principles, experiments, and potential applications of IEC technology. It covers IEC background, theories, device designs, and experimental data, including magnetic field diagrams, fusion cross sections, and system configurations. The document discusses various IEC devices, such as the Bussard HEPS (Polywell) and Miley's ion-injected device, and their potential for space propulsion, aneutronic fusion, and detection systems. It references historical developments by Farnsworth, Hirsch, and Bussard, as well as experiments from 1959 to 2005. The text includes technical details on plasma confinement, ion behavior, grid design, and fusion reaction scaling, along with applications like landmine detection, satellite propulsion, and spacecraft design. It also addresses challenges in achieving stability, breakeven, and practical implementation of IEC technology.

Full text

Page 2

UNCLASSIFIED/ }F8R 8FFl&IAL W&& 8flki\f

Inertial Electrostatic Confinement Fusion

Prepared by:
Acquisition Support Division (DW0-3)
Defense Warning Office
Directorate for Analysis
Defense Intelligence Agency
Author:

AAP Person 70
Administrative Note
COPYRIGHT WARNING: Further dissemination of the photographs in this publication is not authorized.

This product is one in a series of advanced technology reports produced in FY 2009
under the Defense Intelligence Agency, Defense Warning Office's Advanced Aerospace
Weapon System Applications (AAWSA) Program. Comments or questions pertaining to
AAWSA Prog ram
this document should be addressed to !AAP Person 1
Manager, Defense Intelligence Agency, ATTN: CLAR/DWO-3, Bldg 6000 , Washington,
DC 20340- 5100 .

I

ii

UNCLASSIFIED//liQA QFfilGIAk W&E 8HL?f

Page 3

UNCLASSIFIED/ ,'FOR OFFIElIAk WSE OPtklf

Contents
Preface ................................................................................................................. vii
Section I. IEC Background and Basics .................................................................... 1
IEC Background ....................................................................................... ,.,1••········· 3
IEC Basics ............. .............................................................. ................................ 5
Bussard HEPS (or Polywell) Concept ............................................................ 10
Barnes Nebel Penning Trap .......................................................................... 10
Nebel POPS Device ..............................................................................,......... 10
Miley's "Ion Injected" Device ....................................................................... 11
Closing Remarks ......... .......... ................................................................... 11 ,,, •••••• 12
References ...................................................................................................... 13
Section II. Select Experiments ............................................................................. 14
Closing Comments ............................................................................................ 20
References ...................................................................................................... 20
Section III. Other Geometries .............................................................................. 21
Cylindrical IECs ............................................................................................... 21
Electrically-Driven IEC Jet Thruster................................................................... 22
Relation to Other Prior Thrusters ................................................................. 23
JET Extraction From a Spherical IEC ............................................................. 24
Description of the IEC Jet Thruster ............................................................. 24
Comparison to a Conventional "Plasma" Thruster ........................................ 24
Jet Extraction .............................................................................................. . 26
Experimental Jet Design and Performance ................................................... 26
Scale-up to p- 11 B IEC Space Power Unit/Thruster ........................................ 28
The Dipole Assisted IEC (DaIEC) .................................................................. 29
DAIEC Experiments .......................................................................................... 30
Khachan's Studies at U of Sydney .................................................................... 31
Concluding Remarks......................................................................................... 32
References ........................ . .....................................................................

iii

UNCLASSIFIED/ ,CFOA OFFIQIAk Wliii 01\lk¥

11 • • • • • • • • •

32

Page 4

UNCLASSIFIED/ }FOA OFFICl.'1.k W&li Ol\lk¥
Section IV. IEC Theory ......................................................................................... 34
Potential Well Structure ................................................................................... 38
Tzonev et al. - Deep Well Study ....................................................................... 39
Momota et al. - Study of Virtual Electrode Strudure ........................................ 41
Kim - Stability Analysis .................................................................................... 41
Rider - Energy Balance Study .......................................................................... 43
Neutron Source Simulations ............................................................................... 44

References ....................................................................................................... 46
Section V. Potential Applications .......................................................................... 46
Neutron/proton/Xray Sources ............................................................... ......... 46
Integrated X-Ray /Neutron Sources ................................................................ 47
Nuclear and Chemical Explosive Detection Techniques ................................ 47
Overview for Weapons/Nuclear Material Simulation Articles ............. .......... 48
Pulsed Power for the Inspection Station ............................................. ......... 49
Design of the Total Integrated Interrogation System ................................... 50
Detector Array and Analysis System ............................................................ 52
Space Propulsion .............................................................................................. 54
Magnetically-Channeled Spherical IEC Array (MCSA) Concept ......................... 56
Recirculation of Radial Belt Cone Losses ..................................................... 57
Retrapping of Axial-Loss Particles................................................................ 58
Concluding Remarks ........................................................................................... 59

References ................................................................................................ ........ 59
Section VI. Possible Next Step Breakeven Experiment ......................................... 60
Demonstration of Net Energy Gain using IEC Aneutronic Fusion ...................... 60
Vision of a Future p- 11 8 Fusion Plant .......................................................,......... 61

Proposed Breakeven Experiment...................................................................... 62
Concluding Remarks ......................................................................................... 64

iv

UNCLASSIFIED/ /FOA OFFICIAk Wlili 0PU:?f

Page 5

UNCLASSIFIED/ ,SFOA OFFI&IAk WSE 8Ptklf

Figures
Figure 1.1. An UIUC Spherical IEC .............................................................................. 1
Figure 1.2. Idealized Potential Structure Calculated by Hirsch for Monoenergetic
Ions With No Angular Momentum ......................................................... 6
Figure 1.3. Discharge Modes in Gridded Devices Identified by Miley ...................... 9
Figure 1.4. Photo of Star Mode Seen Through a Reaction Vessel Port Window ....... 9
Figure 1.5. Schematic of the UIUC RF Gun Injector for IEC Experiments .... .......... 11
Figure 1.6. RF Gun Attached to an IEC Chamber in the UIUC Laboratory .............. 12
Figure 1.7. Photo of Center Spot Formation ......................................................... 12
Figure 2.1. The "Historic" Early IEC Ion Injection Experiment ............................. 14
Figure 2.2. Neutron Rates Measured With the IEC: Neutron Rates Measured With
the IEC of Figure 2.1 Exceeded 10 9 DT n/s at 150 kV ......................... 14
Figure 2.3. Photograph of a STAR Mode Discharge ............................................... 16
Figure 2.4. IEC Landmine Detection Project at Kyoto University .......................... 17
Figure 2.5. Scheme for Landmine Detection Using a Hybrid Magnetron Type
IEC Neutron Source ............................................................................ 18
Figure 2.6. 3 He Ion Source for Use in 3 He - 3 He Fusion Rate Studies at the U Of
Wisconsin .................................................................................... ........ 19
Figure 3.1. Two Types of Cylindrical IECs ............................................................. 22
Figure 3.2. Jet Operational Mode in Experimental IEC Device and Jet Set-Up ...... 24
Figure 3.3. Illustration of the IEC Jet Thruster Experiment Showing Central
Grid and Two Jet Grids ....................................................................... 27
Figure 3.4. Dipole Reactor Propulsion Scheme ..................................................... 29
Figure 3.5. Dipole Magnetic Field and Layout of Devices ...................................... 30
Figure 3.6. Electron Density Vs. Dipole Magnet Field Strength at 25mtorr, 20mA 31
Figure 4.1. Cross Section of the Experimental Layout of the PFX-I Experiment .... 34
Figure 4.2. Detail of the Anode and the Ion Injection Port in PFX-I ..................... 35
Figure 4.3. Plot of the Q-Value ............................................................................. 37
Figure 4.4. Sketch of Two Opposite Limits of the Beam-Maxwellian Equilibrium .. 38
Figure 4.5. The Definition of the Double Well Depth ............................................. 39
Figure 4.6. The Definition of the Parallel and Perpendicular Velocities at the IEC
Cathode Grid ...................................................................................... 39
Figure 4.7. The Double Well Potential Calculated With IXL Code ......................... 40
Figure 4.8. Ion Density Profile for Potential Well ................................................. 40
Figure 4.9. The D-D Fusion Reaction Rate Versus Cathode Current ..................... 40
Figure 4.10. Plot of Growth Rate of Spherically Converging/Diverging Ion-Beam
Instability......................................................................................... 42
Figure 4.11. Diagram Showing Equipotential Surfaces of the IEC Cathode Grid .. 45
Figure 4.12. Results for Calculations for Ion Energy Distributions 1 st Pass ......... 45
Figure 5.1. Block Diagram of the IEC Pulsed Power System ................................. 49
Figure 5.2. Schematic (View From Top) of a Broad Coverage IEC Inspection

··············································••11••·······

System for Luggage Inspection
51
Figure 5.3. Further Illustration of the Integrated System for Airport Luggage
Inspection ........................................................................................... 53
Figure 5.4. Further Illustration of the Integrated .System for Ship Container
Inspection .......................................................................................... 53
Figure S.S. Image of a Fusion II Spaceship, a 750-MWe IEC Fusion-Powered
Manned Spacecraft With Ion Thruster Propulsion ............................. 54
Figure 5.6. Scale Schematic of Fusion Ship II, a 750-MWe IEC Fusion
Spacecraft .......................................................................................... 55
Figure 5.7. Illustration of a Three-Unit MCSA Device............................................ 57
Figure 5.8. Diagram of Belt-Cusp Fields and Particle Recirculation ............ ........... 57
V

UNCLASSIFIED/ ,CFOA OFFI&IAk WSE 8PtLY

Page 6

UNCLASSIFIED/ /FOR 8ffl@IAL t.1!11!! eHLY
Figure 5.9. Axial Magnetic Field Strength Along Two-Unit MCSA Centerline ......... 58
Figure 5.10. Diagram of Direction Randomization (KAM Effect) Due to the
Magnetic Field Null Region in the IEC ............................................... 59
Figure 6.1. p- 11 B Fusion Cross Section Energy Requirements ............................... 62
Figure 6.2. IEC System With Radio Frequency Ion Gun ....................................... 63
Figure 6.3. Multiple Ion Gun Concept ................................................................... 63
Figure 6.4. Differentially Pumped RF-Driven Ion Gun ........................................... 63

Tables
Table 3.1. Estimated Performance Parameters or the IEC Ion Thruster ..... .......... 28
Table 4.1. Comparison of Analytical and Numerical Estimates of Q-Values in a
Beam-Dominated Solution -- for a SO-kV Square Well ......................... 32
Table 5.1. Three Kinds of Techniques Previously Used in Explosives Detection
System ................................................................................................. 48
Table 5.2. Comparison of IEC Design and Magnetic Fusion Design ....................... 56

vi

UNCLASSIFIED/ /FOR OFFl@IAL l?ISE O,.L\f

Page 7

UNCLASSIFIED/ fFOA QFFIEIAL ~81: 8HLY

Inertial Electrostatic Confinement Fusion
Preface
This report is intended to provide the reader with an overview of the basics,
current experimental status, supporting theory, and potential applications of
inertial electrostatic confinement (IEC} fusion. Emphasis is placed on work in
these areas at the University of Illinois Urbana-Champaign, although some
other research is brought in.
The report shows that IEC is a unique approach to fusion in that it offers a
number of "spin-off" applications, such as a small neutron source for neutron
activation analysis on the route to fusion power. The report further shows that
IEC is one of the few potential fusion approaches that can potentially burn
aneutronic fuels like p- 11 B (hydrogen - Boron 11). In aneutronic fusion,
neutrons carry no more than 1% of the total released energy, greatly reducing
problems associated with neutron radiation. That ability, combined with its
simple mechanical structure and small size, make the IEC reactor, if achieved,
an ideal fusion power unit. Present experimental devices are four to five
orders of magnitude below breakeven (energy out/in = 1) energy gain for p11 B. However, it is argued that the ability to study the physics in very-small­
volume plasmas makes it possible to rapidly investigate scale-up to a power­
producing device. As an example, the report concludes with a conceptual
experiment proposed for demonstration of breakeven conditions for p- 11 B
using a hydrogen plasma simulation.
The author has purposely tried to avoid use of ,e quations in this report to
enhance readability and to stress concepts rather than analysis. However,
considerable analysis is provided in a number of the source references cited.

vii

UNCLASSIFIED/ fFOA OFFICI.IJ.k Wii Ol\lk¥

Page 8

UNCLASSIFIED/ ;CfOA OFFI&IAk WSE 8Ptklf

Section I . IEC Background and Basics
Before considering detail, it is helpful to obtain a rough idea of how inertial electrostatic
confinement (IEC) fusion works.
Gas Feed
Line

High-Volugc

Power Supply

-l-

Figure 1.1. An UIUC Spherical IEC. The plasma discharge betwee·n the grid and vacuum wall creates an Ion
source that is extracted and directed towards the center by the high ly charged negative grid. A photograph of a
typica l IEC chamber is shown in the center. A photograph of the discharge through the view port shows the "Star
Mode" discharge where ion beams are created that pass t hrough the grid openings. This is Important for long run
times si nce ion bombardment of the grids, hence grid wire sputtering , is minimized.

For this purpose the experimental IEC device of Figure 1.1 is considered. As shown, this
"gridded" type IEC has a spherical mesh grid suspended on a high voltage feed-through
in the center of a metal vacuum vessel. The fusion "fuel", e.g. deuterium gas, is first
fed into the chamber originally prepared at high vacuum, e.g. 10-7 Torr. The fuel gas
brings the pressure up into the 10's of Torr region. Then the voltage on the grid is
raised into the many (-) kV range, creating a plasma discharge between the high
voltage grid and chamber wall (electrical ly grounded). The high negative voltage on the
grid serves to extract the ion from the plasma, accelerating them towards the center of
the grid where in principle they interact and fuse. In practice however, the scattering
cross section is larger than the fusion cross section. Thus many ions scatter without
reacting (fusing). Many "near misses" essentially pass straight through the center of the
plasma core and exit. This dominance of scattering over fusion reactions is the central
issue of all fusion confinement approaches, forcing use of strong confinement so the
ions have many passes and hence a good probabi lity of fusing before being lost from
the fusion reaction chamber. In the IEC multiple passes occur because the ions are
trapped in a potential "well" created by the buildup of positive charge due to the large
flow of the accelerated ions into a small "core" region in the center of the negative grid.
Viewed in another way, the ions extracted from the region between the grid and the
wall can scatter and pass back through the grid, but can only return to the same
potential surface they were born on. Thus they cannot reach the vessel wall, but
instead lose their kinetic energy, stop, and are accelerated by the grid potentia l back
into the center of the grid. This then provides many "recirculations" through the center
of the grid volume where they have a finite probability of fusing. If not for the existence

1

UNCLASSIFIED/ / EAR OFFI CI OLi !liF QN L¥

Page 9

UNCLASSIFIED/ /P"Olt OP"P"lelAL tt!I!! er•tY
of various loss channels such as hitting the grid, charge exchange, or up-scattering in
energy, the ions would be prematurely trapped in the potential well until they fused.
The conventional requirement for fusion confinement is given in terms of the
confinement parameter, nt, where n = the ion density and t is the confinement time.
Also the ion energy (or temperature T) must be in the 20 or more keV range assuming
D-T fuel. For breakeven, J. Lawson developed his famous "criterion" nt = 10 14 cm·3 -sec
at T > 15 keV for DT fusion. Here t = energy confinement time, sec; n = ion density,
cm ·3 and T = ion "temperature" or average energy.
The Lawson criterion is independent of the confinement method, but does depend on
the fuel via the selection of cross sections in the derivation. Magnetic confinement is
generally limited to n ~ 10 14 cm· 3 by pressure balance. Then a confinement time • of~
1 sec is required. For Inertia Confinement Fusion (ICF) or "laser fusion", compression of
targets can achieve n N 10 24 , so a confinement time of only 10-10 sec is need
(corresponding to the disassembly time of the compressed target). (For a general
review of energy breakeven requirement for D-T fusion and other fuels like D- 3 He and
p- 11 8, the reader referred to: G. Miley, Fusion Energy Conversion, American Nuclear
Society, La Grange, IL 1973).
Now consider the IEC. In principle, the ions focused on the center of the IEC can
achieve a density of n 10 16 , giving a required confinement time of 10- 2 sec for DT
fusion breakeven. This time can be restated in terms of the number of ion recirculations
in the IEC potential well by dividing the well diameter by the average velocity of the
recirculating ion. In later cases discussed in this report, this number is typically quite
large, usually N1000 recirculations. Achievement of this large number of recirculations
requires strong reduction of all of the loss channels noted earlier. Grid losses can be
reduced by STAR mode operation discussed later where the recirculating ions possess
beam -like trajectories passing through the center of the grid opening. The ideal,
however, is the elimination of the grid altogether which can be done via formation of
virtual potential structures, originally proposed by Farnsworth and discussed in
following sections. The temperature requirement also leads to a fundamental difference
in the IEC physics vs. other confinement approaches. (Note that "temperature" is not a
proper term here since it implies an equilibrium distribution while the IEC is far from
that with its beam-like ions. Thus, the reader should view "temperature" as meaning
average energy of the ions. In doing that, however, it is assumed that the ion energy
distribution is known so that averaging is possible). Most ions in the IEC are born near
the chamber wall so are accelerated to an energy close to the applied voltage on the
grid during the extraction process. A reasonable estimate is that the ions reaching the
fusion region in the center have an energy near 80 percent of the grid voltage on
average. Thus it becomes relatively easy to achieve the Lawson D-T requirement by
applying a voltage of~ 25 kV. In fact most IEC neutron sources discussed later operate
at voltages > 80 kV to get into an energy range giving a higher fusion cross section. In
sharp contrast, magnetic fusion devices struggle to obtain a temperature in the 10 keV
range since the entire plasma population must be heated (vs. direct ion acceler ation in
the IEC) due to the equilibrium distribution maintained in these plasmas. Another very
important point is that Lawson assumed that the ions and electrons were in thermal
equilibrium, at the same temperature, T. This is a reasonable approximation for
magnetic confinement, but not so for the IEC. In the latter, the electrons form a
"distorted" Maxwellian distribution at an effective temperature well below that of the

~

2

UNCLASSIFIED/ /FOR &FFICI0~ 1155 AN! X

Page 10

UNCLASSIFIED/ /POI\ orr1e1At li!II!! OHL¥
beam-like ions. Since electron energy loss processes such as radiation emission are
serious, the Lawson temperature criterion must be modified for the IEC. A first rough
estimate is the Te/T1< 1/3 for DT. (Here T1and Te are the ion and electron
"temperatures", respectively). Control of th is ratio is a complex physics issue, involving
the relative ion and electron source rates and energies and the potential well structure.
In later sections use of p- 11 B (hydrogen-boron-11) fuel in the IEC is considered. This is
very attractive since it provides all charged particle reaction products, making this an
unique "aneutronic" system. Such a reactor represents a truly ideal system from an
environmental and energy sustainability perspective. However, for such fuels, t he
Larson criterion becomes much more demanding, increasing nT by two orders of
magnitude and T to 150 kV. Also, for the IEC, a Te/T1< 1/9 becomes essential. (Using
temperature ration is a very simplified representation. The radiation losses are quite
sensitive to deviation in the actual energy distribution of the ions and electrons . For
example, electron Bremsstrahlung emission primarily comes from the high energy "tail"
of the electron distribution while energy transfer with ions is dominated by the "foot" of
the electron distribution. At high powers, interactions in these regions can become quite
non -linear, depleting or "burning out 0 the local populations in these regions. This effect
causes energy losses to saturate, hence can be quite beneficial under some
circumstance . However, the phenomenon is complex to evaluate numerically, so little
has been reported on it for IECs to date). The very aggressive p- 11 B Lawson
requirement is employed in the design of the breakeven experiment of Section VI.
While this discussion of IEC physics has been greatly simplified, it hopefully provides
more insight into the basic concepts and issue before delving into more detail.

IEC BACKGROUND
Inertial Electrostatic Confinement (IEC) was conceived of by Philo Farnsworth, the
inventor of electronic television, as an approach to fusion power using electrostatic
fields for confinement (Reference 1.2). When he did this in 1955, the prime approaches
being pursued worldwide were magnetic confinement or inertial (laser compression of
targets) confinement. In fact, electrostatic confinement had been written off by most
scientists due to Earnshaw's theorem (Reference 1.4) which stated that plasma could
not be confined by electrostatic fields alone. That was simply an expression of the fact
that use of a biased plate to confine one species, say ions, would automatically attract
the opposite species, electrons, such that the whole plasma would transport to the
plate. Farnsworth seemed to intuitively understand that this theorem assumed steady­
state, so that if, as in IEC, the ions were dynamically moving and confined, they would
electrostatically confine the electrons. Farnsworth went further and realized that in a
spherical system virtual electrodes would form a high density plasma region if the
confined ions were focused at the center of the sphere (Reference 1.2).
While Hirsh worked with Farnsworth to demonstrate early experimental success with
IEC experiments (Reference 1.2), the concept passed from view as magnetic and
inertial confinement resea1rch exponentiated. Then in the late 1990s R. W. Bussard
revived the concept with the hybrid IEC magnetic approach (Reference 1.6- 1.7). In this
approach the electrons were confined in the magnetic field, forming a potentials trap for
ions. [Note the similarity to the original conceptual potential well discussed by Elmore,
et al. (Reference 1.1)]. Upon invitation by R.W. Bussard to join this effort, the author,
George Miley, undertook supporting experiments that were a variation of the original
3

UNCLASSIFIED/ /EAR OFFICIO! !!SF ON! X

Page 11

UNCLASSIFIED/ /FOR OFFI&IAk W&E 8Ptklf
Hirsch approach, using electrostatic grids to form a t rap with ions that then brought
electrons in. He realized that this approach could result in a very attractive low level
neutron source for neutron activation applications, and began that development. Such
work was soon taken up in several other laboratories, including Los Alamos Nationa l
Laboratory (LANL), University of Wisconsin and Kyoto University. Meanwhile Bussard's
work continued with strong funding from the military. However, little was published or
known about this until 2008 when he made public appeals on "YouTube" to regain
funding stopped just when the experiment achieved a major success. Subsequ,ently,
funding resumed but R. W. Bussard passed away shortly thereafter due to a long battle
with cancer. His company and work were then taken over by R. Nebel who took leave
from LANL to undertake this new work. That effort is now in progress and represents
the largest IEC power oriented project in the US or elsewhere (but still modest with a
half dozen senior scientists involved). Meanwhile, laboratories elsewhere working on
IEC neutron sources have continued while the U of Wisconsin has added an IEC proton
source as an option using sim ilar technology. The labs, including the UIUC, have fusion
power as an ultimate goal, but must focus on their funded near-term "spin-off"
projects.
At this point the IEC still receives no funding from DOE which remains focused on the
Tokomak route to fusion power. Thus, with little funding, slow progress has been made
in answering the key question of whether or not the IEC can be developed for fusion
power. If it can, the device would be simpler and smaller than a Tokamak, malking it an
extremely attractive option. In addition, its beam - like reactions (highly non-Maxwellian)
make the IEC very well suited for burning alternate ("advanced") fuels like D- 3 He and
p- 11 B which are much more environmentally favorable than conventional DT fusion .
Unfortunately Tokomaks are not well equipped to go forward to such fuels.
On the other hand, the use of non-power-producing IECs for other applications, such as
sma ll neutron, proton, and x-ray sources, has been .amply demonstrated. Now, the
issue is how well and in what applications the IEC sources compete commercia lly with
other options such as accelerator target sources.
This report is intended to provide the reader with important insight into the physics and
technology of IECs relative to both power and neutron/proton/x-ray sources. With this
background, hopefu lly the reader can formulate an opinion about the potential for IEC
applications. Due to the limited funding for IEC research to date, much more has to be
done to actually demonstrate its application, especially for power production. Thus that
opinion must remain a personal one for the reader.
One other limitation of this report is that it largely provides details based on the
author's work on IECs over the last decade. Thus it will not do justice to the ongoing
work by others, notably at EMC 2 on the Bussard Polywell device or the advanced
gridded IEC neuron/proton so urce development work at the U of Wisconsin, Kyoto
University, and Tokyo Institute of Technology. Some insight into these efforts is given
in comments and in references supplied, but t he reader is encouraged to discuss that
work with those individuals directly.

4

UNCLASSIFIED/ /POI\ 0rr1e1At l?ISE 8Ptklf

Page 12

UNCLASSIFIED/ /fOft Offl@IAL l!ISE 8P•tlf

IEC BASICS
We begin by presenting the early very basic theoretical study by Elmore, Tuck, and
Watson (Reference 1.1). That addresses the key question of the fusion power density
obtainable with potential well confinement. One of their basic assumptions is that the
potential well is "dug" by electrons which trap ions. Certain added assumptions lead to
well depth, etc, and finally they conclude that the system is unstable for ion densities
sufficiently high that appreciable thermonuclear yield is expected. They qualify this
conclusion saying "admittedly, a more thorough investigation is required to obtain a
complete understanding of stability of this electrostatic device".
This result was quite negative for electron formation of potential wells, but left the
route possibly open since the subject "needed a more thorough investigation." Later,
for various reasons, R. W. Bussard still pursued this concept by introducing the High­
Energy Power Source (HEPS) Polywell device which uses a spherical simulated magnetic

Text continues in the original file (72 pages).

Previous: DOW-UAP-D124 — AAWSAP DIRD, Space Access: Where We’ve Been and Where We Could Go, March 2010 · Next: DOW-UAP-D126 — AAWSAP DIRD, Advanced Nuclear Propulsion for Manned Deep Space Missions, March 2010

Same topic: title & summary match

Same location: Las Vegas, Nevada

Same period: 2010

Same release: Release 06

Same agency: DoW