DOW-UAP-D134 — AAWSAP DIRD, Maverick Inventor Versus Corporate Inventor: Where Will the Next Major Innovations Arise, March 2010
File DOW-UAP-D134 is a declassified pdf from Department of War, recording an incident dated 3/30/10 at Las Vegas, Nevada, published in Release 06 (2026-09-18). This page carries the original file, its official summary and its full text.
- File
- DOW-UAP-D134
- Agency
- Department of War
- Incident date
- 3/30/10
- Location
- Las Vegas, Nevada
- Released in
- Release 06 (2026-09-18)
- File type
Topics: AAWSAP & DIRDs
This document is a Defense Intelligence Reference Document (DIRD), a technical reference format used by the Defense Intelligence Agency (DIA) to capture baseline knowledge on a specific topic for later analytic use. DIRDs are best understood as reference and synthesis products rather than as original research. It is one of 38 DIRDs produced under the Advanced Aerospace Weapon System Applications Program (AAWSAP) between 2009 and 2011. Because AAWSAP’s scope permitted a broad range of supporting topics, not every DIRD in the series directly concerns aerospace systems or future threat assessment. The following summary reflects the DIRD’s scope and framing at the time of writing and should not be read as implying current validation of the concepts discussed.
This DIRD compares lone “maverick” inventors with researchers working inside larger organizations in order to ask where major future breakthroughs are most likely to come from, especially in unconventional energy and propulsion. It concludes that the strongest candidates are technically trained, relatively independent, and flexible researchers working with some freedom from institutional constraint. Because that preferred profile closely resembles the kind of researcher who appears to have authored or shaped much of the broader AAWSAP DIRD effort, the document reflects a notable methodological circularity, validating the program’s operational model rather than neutrally assessing the innovation ecosystem.
Open original file · WAR.GOV page
TL;DR
Turns out the real Vegas jackpot was a lone inventor, not a slot machine.
- DIRD PDF by DoW, March 2010, Las Vegas, NV
- Compares lone “maverick” inventors to corporate researchers in energy/propulsion.
- Concludes mavericks, technically trained and independent, are strongest innovation candidates.
AI summary
An unclassified report titled "Maverick Inventor Versus Corporate Inventor: Where Will the Next Major Innovations Arise?" dated March 2010, prepared by the Defense Intelligence Agency, discusses sources of technological innovation, focusing on maverick and corporate inventors. It examines their backgrounds, resources, approaches, and challenges, particularly in energy and propulsion fields. The document categorizes inventors into types based on their education, methods, and funding, noting differences in their success rates and innovation styles. It references figures like Dean Kamen and institutions such as MIT's Radlab and DARPA, and includes a table comparing inventor types.
Full text
Page 1
UNCLASSIFIED/ I FOR 8FFIEiIAl W&& &Nia¥
Defense
Intelligence
Reference
Document
Acquisition Threat Support
30 Marc'h 2010
ICOD : 1 December 2009
DIA-08- 1003-017
Maverick Inventor Versus
Corporate Inventor: Where
Will the Next Major
Innovations Arise?
UNCLASSIFIED/ /5i0A OFFIEil.t.l WS& OHL¥
Page 2
UNCLASSIFIED//f8R 8FFIOIAL Y&E 8ttL¥
Maverick Inventor Versus Corporate Inventor: Where Will
the Next Major Innovations Arise?
Prepared by:
Acquisition Support Division ( DW0- 3)
Defense Warning Office
Directorate for Analvsis
Defense Intelligence Agency
Author:
AAP Person 75
Administrative Note
COPYRIGHT WARNING: Further dissemi nation of the photographs in this publication is not authorized .
This product is one in a series of advanced technology reports produced in FY 2009
under the Defense I ntelligence Agency, Defense Wa rn ing Office's Advanced Aerospace
Weapon System Applications (AAWSA) Program. Comments or questions pertaining to
this document should be addressed to !AAP Person 1
AAWSA Prog ram
Manager, Defense Intelligence Agency, ATTN: CLAR/DWO-3, Bldg 6000, Washington,
DC 20340-5100.
l
ii
UNCLASSIFIED//liQA QFfilGlillk W&& BHLY
Page 3
UNCLASSIFIEDt {FOR OSFIQIAl ~91!! e ..c,
Contents
Introduction ................................................................................................ ........... iv
Maverick Inventor ....................................................................................... ........... 1
Corporate Inventor ..................................................................................... ........... 2
Technologies .......................................................................................................... 4
The Type 1 Inventor ............................................................................................... 6
The Type 2 Inventor .................................................................................... ........... 7
The Type 3 Inventor ...................................................................................... ........... 8
The Type 4 Inventor .................................................................................... ......... 10
The Type 5 Inventor .................................................................................... ......... 10
Comparisons ............................................................................................... ......... 11
Conclusions ........................................................................................................... 12
Tables
Table 1. Types and Examples of Think Tanks............................................... ........... 3
Table 2. Essential Elements That Characterize the Types of Inventor ........ . ......... 11
iii
UNCLASSIFIED/ I FOR 8FFl@IAL ~91! 8HLY
Page 4
UNCLASSIFIED/ f FOR OFFI@IAL ~SI! 8HL'I
Maverick Inventor Versus Corporate Inventor: Where Will
the Next Major Innovations Arise?
Introduction
Technological innovation has been advanced by several sectors of human
society and via a diverse set of circumstances. In the early 20th century, the
solitary maverick inventor was responsible for the bedrock of most of today's
industrial and commercial enterprises. As these enterprises grew larger, they
could afford their own research and development departments, tasking them
with developing products and processes aimed at increasing the market share
of the parent company. Generally speaking, as time went on these types of
enterprises became less hotbeds of true innovation than places where
improvements to the current technologies were tightly managed. Such
management became stultifying for many inventors wishing to produce true
innovation, and these mavericks shunned the commercial research agencies
and went off to carry out their own brand of research.
Another institution where true innovation is fostered is the university.
University research as it exists today started in Europe only in the 18th
century. The bulk of the discoveries in science leading to technologica l
innovation came from university research laboratories in the 19th and early
20th centuries. Currently there is considerable controversy surrounding the
degree to which research at universities is free from external influences,
whether from within the university, from the greater scientific community, or
from public and/or private agencies that fund the research. As university
salaries and expenses go up, there is increasing reliance on external funding
sources, the majority of which wish to exert some influence over the type of
research they are underwriting.
Human aggression and human needs gave birth to two additional areas of
innovation. As governments became embroiled in conflicts, they found the
need to fund "think tanks" for the purposes of stimulating scientific
developments that could aid war efforts. As well, the needs of their
constituents for food, shelter, health care, energy, economic development,
space exploration, and so forth demanded the establishment of government
funded agencies to perform research and produce policy. To be effective,
military planners needed access to the most innovative technologies in all
areas of endeavor, not just armaments, and so established their own research
and development departments.
Circumstances determine the temporal requirement for innovation. Modern
versions of the Four Horsemen of the Apocalypse {wars, pestilence, lies,
famine/death: read conflict, environment, economy, health) pretty well sum
up the major stimulants that foster innovation. Fortunately, human society-at
least so far-has shown a remarkable propensity for inventing methods of
overcoming seemingly insurmountable obstacles.
This paper concentrates on two areas of technological innovation where
solutions have been particularly hard to come by-namely energy and
iv
UNCLASSIFIED/ ,'P81t err1e1At ~SI! er~L'I
Page 5
UNCLASSIFIED/ fFOA OFFI&IAl WSE 8HL'I
propulsion, in particular aerospace and space propulsion. It is now the case
that new and exotic materials and their dimensions are driving the quality and
quantity of energy and propulsion innovations and preventing the average
inventor from contributing new and useful forms and assemblies. The capital
outlay required to probe the limits of current high technology in search of a
new breakthrough is also beyond the means of the vast majority of lone
inventors. These are the major reasons for the shift in focus from the lone
maverick inventor to the "corporate inventor," the latter being a part of a
large organization.
This paper compares the roles of the maverick inventor who is less
constrained by the strictures of a large organization with those of the
corporate inventor and provides some insight into where to expect required
future innovations in the areas of energy and propulsion.
V
UNCLASSIFIED//EOR OFEICI CL lal&li 01'11.¥
Page 6
UNCLASSIFIED/ I FOR 8FFl@IAL ~8! er•t'i'
Maverick Inventor
Most of the easy combinations of components and materials have been investigated
repeatedly since the time of Michael Faraday. However, it is still to this "low-hanging
fruit" that the average maverick inventor is drawn for inspiration. For example, in the
area of energy innovation, it is still attractive to many inventors to try various
combinations of permanent magnets and wire to try to improve the efficiency of
modern electrical machinery, or better yet, claim to extract possibly limitless energy
from these magnets. The average energy inventor is not bothered by pesky Laws of
Energy Conservation or that the devices he is spending endless time on have been
investigated hundreds of times before.
There is also the role of the media, most important the Internet, in continuing to
stimulate the creativity of the maverick inventor. Movies continue to depict the lone
genius saving the planet via some invention, be it a physical weapon or a piece of
computer code. This no doubt propels succeeding generations to believe that they may
one day single-handedly develop a new free-energy or antigravity device and save the
planet. Unfortunately, the Internet has fostered the belief that new inventions,
especially in the areas of energy generation and gravity control, are relatively
straightforward - one simply needs the correct comb,ination of macroscopic components.
One of the disadvantages of the access to apparent technological innovation that the
Internet provides is to foster and maintain intellectual and experimental laziness. This
manifests itself in many ways, principally in that the prospective inventor increasingly
believes that simply spending a few minutes on the Internet can give him all the
background information about who has done what in a particular field of invention.
Indeed, the would-be inventor does not even need to leave his chair and physically
investigate the situation himself. A corollary concern is the lack of information on prior
attempts that is available to maverick inventors. Whereas the corporate inventor has
immediate access to a broad range of technical resources, including patents and
scientific and technical publications, the cost of these resources and their publicly
accessible concentration in university libraries drive the average maverick inventor to
rely solely on the Internet. Fortunately there are now positive signs that at least as far
as "free energy" and antigravity are concerned, there are Internet sites trying to be
repositories for failed inventions in these areas (Reference 1, 2).
Another major problem is the decreasing reliance on a sound technical education, either
in the sciences or in engineering. Why bother enduring 4 years of an extremely difficult
undergraduate program when all the answers are right there on the computer screen. It
is the age of instant, albeit self-proclaimed, geniuses. No need to bother with correct
measurement procedures or proper control experiments when you can publish the
results of your studies on YouTube without bothersome peer review.
So how might one characterize the maverick inventor? Useful categories of maverick
inventors (assumed to be in the context of the late 20th and early 21st centuries)
might include the following types:
•
Individual with no formal training and little money.
•
Individual with no formal training and some money.
1
UNCLASSIFIED/ I FOlil OFFIEiIAl WSE Ortllf
Page 7
UNCLASSIFIED/ }FOA OFFI€iIAb WSE ONblf
•
Individual with formal training and little money.
•
Individual with formal training and some money.
•
Small group (usually two or three) of knowledgeable inventors with money.
"Formal training" is assumed to be in the specific scientific or engineering discipline in
which the invention would naturally be situated. Of course, in the last entry in the
above list, the maverick inventor begins to look more like the "corporate inventor," but
the idea should be clear.
Although this paper does not dwell on the personality of the maverick inventor, it is
useful to remind ourselves that the maverick inventor is by definition a loner both in
social and scientific/techn ical areas. In an online article (Reference 3), maverick
inventor Dean Kamen 1 writes: "It's not that they're brilliant or well-educated ... They
work all the time. They don't let failure demoralize or destroy them. They pick
themselves up and keep going and eventually, every once in a while, one of your ideas
actually breaks through and works, and it makes all that stuff seem worthwhile."
Kamen's article goes on to state: "Stubborn, delusionally optimistic, creative, fearless,
flexible and focused are some of the ways psychologists and business people describe
the personality of the maverick ...'You need to be in denial or in ignorance about the
huge challenges you face,' laughs Guy Kawasaki, a former Apple executive and
entrepreneur who's starting the self-described "magazine rack" alltop.com. 'You have to
believe that it wouldn't be hard for you to succeed."'
Corporate Inventor
The corporate inventor is a part of and relies on a large organization, conveniently
labeled a think tank, to both stimu late and susta in him. There is constant interaction
between like-minded innovators that serves both as a stimulus to explore new areas
and as a much-needed "dead-end detector." Usually, sufficient cash and equipment are
on hand, especially when the desired innovation is being funded externally. These think
tanks may be government, military, academic, corporate, or private. The closest model
to the freedom associated with the maverick inventor is usually found in a university
setting, although a number of privately sponsored institutions exist (for example,
Perimeter Institute in Waterloo, Canada). At least until recently, academic institutions
prided themselves in the freedom granted to their research scientists and engineers.
Table 1 provides examples of the various types of th ink tanks.
' Dean Kamen Is an experienced Inventor In the medical field, where his Inventions Include the AutoSyrlnge . Among
his many other inventions are devices using the Stirling cycle for energy generation and water purification and the
Segway Personal Transporter.
2
UNCLASSIFIED//FOlt err1e1At t,91! eNtt
Page 8
UNCLASSIFIED/}FOA OFFI&IAb W&& 8PtbY
Table 1. Types and Examples of Think Tanks
Type
Universities
Government
Examples
Radlab, MIT, Cambridge, MA
Sandia National Laboratories,
Albuquerque, NM
Lawrence Livermore National Laboratory,
Livermore, CA
Brookhaven National Laboratory, Upton,
NY
Quasi -Government/Military
Corporate
NASA (for example, Glenn Research
Center, Brook Pa rk, OH)
DARPA, Arlinqton, VA
GM Research Laboratory, Warren, MI
Alcatel/Lucent - Bell Labs, Murray Hill, NJ
Skunk Works, Palmdale, CA
Perimeter I nstitute for Theoretica I Physics,
Waterloo, Canada
Privately Funded
Institute for Advanced Studies, Austin , TX
Independent, Nonprofit
SARA (Scientific Applications & Research
Associates) Cypress, CA
Battelle, Columbus, OH
SRI International, Menlo Park, CA
EPRI (Electric Power Research Institute),
Palo Alto, CA
Austrian Research Centers, Sei ber sdorf,
Austria
These entities typically arose in response to a particular need or crisis. Perhaps the
most famous and effective th ink tank was the vast agency known as the Manhattan
District. Less well known to the public was, for example, the RadLab at MIT.
Except in the case of privately funded organizations, they all support many hundreds to
thousands of researchers, of which a variable proportion could be termed "inventors."
Even the smaller entities support a dozen or so highly motivated scientists and
engineers easily classified as inventors.
A benefit of being an inventor in a large organization is access to information. The
corporate inventor can quickly determine whether a certa in avenue of approach has
3
UNCLASSIFIED/ /EAR OFFICI0L !l&li Ql'lls¥
Page 9
UNCLASSIFIED/ /FOR 8FFl@IAL l:991! Oi ◄ Lf
already been tried, using resources not generally available to the maverick inventor,
such as patent searches, scientific and technical documents, or an in-house library.
Another benefit is access to the latest technical apparatus, prototyping, and machining
capabilities. In most cases, the inventor does not need to be an expert in the operation
of all types of analytical or experimental equipment or machine tools. There are
technicians at his disposal! able to convert his ideas i1nto reality.
A relatively recent development in the larger organizations is the establishment of a
"blue-sky" team of highly creative individuals, sometimes just two or three people,
whose job it is to think outside the corporate box and provide directions and policy,
usually for the long term. However, in general, their tasks still fall within the general
purview of the entity funding them. Sometimes government laboratories will allow such
teams to investigate unusual areas and possibly set up experiments leading to eventual
inventions assigned to the laboratory. A particular example is that of Tajmar (Reference
4). Other relevant models for this type of activity are found in research and university
hospitals, where continuous innovation is the norm.
Corporate inventors also benefit from belonging to an organization that includes people
with business acumen. An invention is worthless as a commercial innovation if it cannot
be produced or marketed at a competitive price. The business side of the corporation is
an essential component of successful innovation. The maverick inventor typically does
not have these skills close at hand, and often the enterprise fails not for techn ical
reasons, but because the inventor has not thought out an appropriate business plan.
However, there are drawbacks to the life of the corporate inventor. Fluctuations in the
overall economy can put projects on hold, cause them to be canceled, or force layoffs
that can stall or kill a project. The maverick inventor will strive to keep his project alive
regardless of the external economy, which unfortunately sometimes means loss of
savings, house, family, friends, and so forth. A Not Invented Here (NIH) syndrome
often can interfere with overall progress in areas where a corporate inventor approach
is the most suitable. If an idea did not originate with a particular organization, it may
not be pursued, even though it may represent the best approach. Maverick inventors
rarely suffer from NIH. Whereas the maverick inventor is generally accustomed to
putting 100 percent of his time into the invention, the corporate inventor may suffer
from burnout if he is not as personally motivated or has such a personal stock in the
invention. After a while, "group think" syndrome can infect large organizations,
including their innovators. This happens in organizations that do not recognize or
encourage radical thinking, resulting in mediocre innovation performance. This process
is exacerbated if the number of projects being attended to by corporate inventors starts
to overwhelm them. The maverick inventor is usually single minded in his attention.
Technologies
In order to gain a clearer understanding of the relatiive roles of the maverick and the
corporate inventor, it is instructive to observe how each addresses specific technological
areas. This paper concentrates on innovations in the areas of unconventional energy
and propulsion systems as examples of ideas pursued by the maverick inventor in
particular. The study does not focus on how the personality of the maverick inventor
determines his innovative capacity so much as it focuses on what tools and techniques
are available to him in addressing a particular potential innovation.
4
UNCLASSIFIED//FOA QFFI&IAL tt91! DNLf
Page 10
UNCLASSIFIED// POR OPPICIJltt tt9! or•t I
The inventors highlighted in this study investigate technologies encompassing the
production or conversion of energy from novel sources, sometimes referred to as "new
primary energy sources," including permanent magnets, cold and warm fusion, "zero
point fluctuations," and novel uses of batteries and rotating systems, as well as
theoretical and experimental approaches to modulating the local gravity field. Some of
these inventors and inventions are described in recent books (see Reference 5, 6).
Historically, what has been the relative contribution to the major innovations in these
areas? Taking the specific area of electrical energy production as an example, it was the
contributions, inspiration, and determination of maverick inventors such as Tesla that
resulted in the design of many of the current power-generating technologies in use
today. As far as radically new recent designs of alternators and motors is concerned,
there have been very few innovations from maverick inventors, Flynn 's dual-path
magnetic circuit being a notable exception (Reference 7). Most of the innovations in this
area come from corporate inventors in the electric power industry, as the only path left
toward increasing efficiency is through novel materials such as high-temperature
superconductors. Such research is generally out of reach of the maverick inventor.
There has been no lack of attempts by maverick inventors to produce electrical "free
energy" and related machines.
In the area of space propulsion and earth-to-orbit methods in particular, again it was
the contributions of mavericks such as Tsiolkovsky and Goddard that laid the
foundations for modern rocketry. Both inventors took a practical approach to rocketry,
as the field was in its embryonic state. Initially denigrated as being "on ly" a high school
math teacher with no formal scientific training, Tsiolkovsky developed the fundamental
equation for rocket propullsion. Although Goddard was university trained, like
Tsiolkovsky, his fundamental work on rocket dynamics was largely ignored until later in
his life. During their early, creative years, neither man worked for large organizations.
As far as radically new propulsive means are concerned, there have been innovations
only in the efficiency and overall design, and the fundamental mass expulsion model
has remained unchanged. The efficiency innovations have sprung from corporate
inventors who have the resources to plan and test their increasingly costly designs only
in the context of large organizations.
The current in novations in these two fields come from larger organizations such as
those highlighted in the previous section. However it should be noted that these
innovations, largely increased in efficiency, have been economically as well as
technically viable. There are plenty of novel thruster designs that would be excellent
candidates for inclusion in the breakthrough category if only they were not so
expensive. Antimatter propulsion using positrons and antiprotons is a good example
(Reference 8, 9). In the early development of electrical machines, many parts of the
system were very expensive-electrical steel laminations, for example- but mass
production brought prices down. Fortunately inventions are not completely discarded
simply because they are too costly at the time of their conception. Increasingly today,
materials costs rather than manufacturing costs drive economic decisions about the
development and commercialization of inventions in this category. This is due in part to
the replacement of human manpower with its robotic equivalent and the scarcity of
certain strategic technologically important raw materials, such as rare earths.
5
UNCLASSIFIED/ ,'FOR QfifilCIAk Wli& 8PtLY
Page 11
UNCLASSIFIED/) FOR CFFIEIAL ~SE 8PU1¥
The Type 1 Inventor
One should examine the area of novel energy generation inventions from the
standpoint of the maverick inventor who has no formal training. Because the approach
and timel ine of the typical energy inventor mimic those of the propuls ion (read
"antigravity") inventor,2 we will concentrate on the energy inventor. Often the invention
involves a device that is p•urported to produce more energy than it consumes. In some
cases the inventor naively thinks his invention is simply creating the extra energy from
nothing. More often the inventor believes his device is tapping a new energy source,
such as "zero-point energy" or "magnetic energy ." He typically begins his quest by
literally playing with st orage batteries or pu lse-driven, simple, permanent-magnet
based motors. Since the typical maverick inventor has negligible funds for research and
development, cheap measuring instruments are the norm. A very cursory
understanding of electrical wiring and possibly a rudimentary capability in designing
solid-state circuitry seem all that are necessary from an educational standpoint. Delving
into thermodynamics, proper experiment design, error analysis, or even power factor is
usually seen as taking valuable time away from construction of an invention prototype.
Alas, it is most often in the area of measurement that the maverick inventor solidifies
his belief that he has discovered the answer to the world's energy problems. His fear of
ridicule and belief that the local university or testing agency would (a) steal the
invention, (b) not do a proper test because they do not believe in the underlying
concept (for example, zero-point energy), or (c) are in league with big oil and will
suppress the invention ensure that proper measurements are rarely performed at the
important early stages of the invention's development. Fear of suppression also
contributes to the typical inventor's lack of proper note taking. The test instruments
used usually are not su itable for use in measuring the various electrical parameters in,
for example, pulsed -motor designs. Even if more expensive oscilloscopes are
purchased, their internal math functions are overrelied upon without giving a second
thought to applicability, calibration, or use of proper probes within specification, among
a host of bothersome details. The measurement problem is generally compounded
when attempting to measure the true power or energy output of a device, especially
where the output is a rotating shaft or source of heat.
The modern Type 1 inventor shuns publishing in the peer-reviewed literature for
obvious reasons and instead makes a YouTube video or appea rs on a TV "weird science"
program or news clip to further promote this incredible invention .
Up to th is point, the invention has been developed using personal or immediate family
funds. Once the maverick inventor is convinced he has the ultimate solution, the next
step is to raise the necessary funds to produce a larger, higher power prototype . Note
the key step of independently verifying the technical validity of the device at low power
is to be avoided . "Only a big power output will convince the skeptics" is the slogan at
this stage. And a high-power prototype will take much longer to build, thus buying
more t ime for the inventor to invent excuses for why the whole idea was unworkable in
the first place . Usually the original prototype is either scrapped or robbed of
components to make a new high-power device.
2 For typical examples of Inventors concentrating on gravity and propul sion means, see Reference 10, 11, 12.
6
UNCLASSIFIED//EAR 0551Cl.t.L Wi& 8PtLY
Page 12
UNCLASSIFIED/ }FOR 8FFI@IAL ~91! 8HLY
Where does the inventor find funding for such a development? The typical inventor
(Reference 13) will canvas a wider network of friends, his church, a local venture
capitalist or private investor who is not very savvy, or a fund specifically establ ished to
invest in exotic energy startups (Reference 14, 15). After convincing them of the
incredible return on their investment in the technology by "demonstrating" it (without
proper protocols, test equipment, and so forth), manpower, space, and new equipment
are purchased. Usually the last thing on the inventor's mind at this stage is wasting
investors' money on an independent laboratory test such as might be found at a local
university's engineering or physics department or certified testing laboratory to
determine whether there is any validity to the technology.
Around this time, the major investors start to sense there might be something amiss in
their original assessment of the validity of the technology. This might arise from any
number of factors, including continual requests for more funding, continual delays in
demonstrating the new high-power unit, more-informed friends asking probing
technical questions, and so forth. Investors start to withdraw, accepting the fact of their
bad investment, and the inventor eventually recedes into oblivion or skips town to start
up again under a different guise somewhere else. This is typical behavior for the con
artist (Reference 16, 17, 18), whose exploits will not be further analyzed herein.
However, some enterprising individuals parlay their experience into related
conventional businesses (Reference 19), and some investors hang on long past the time
a reasonable person would quit (Reference 20).
Patent protection generally is not sought by the Type 1 inventor. And if a patent is
sought, either it is rejected outright by the patent office or a watered-down version is
obtained that is usually worthless from either the physics or technical point of view or
as part of the intellectual property to eventually be sold to an investor interested in
commercializing the device.
What can be learned from the Type 1 inventor? Given their lack of formal education in
the relevant disciplines, there is a negligible chance that Type 1 inventors will
contribute anything of significance to major innovations in the energy and propulsion
areas. Their undisciplined approach, coupled with th,e ir lack of funds and interest in
science by media, virtually guarantees failure.
The Type 2 Inventor
The major-and sometimes only-difference between Type 2 and Type 1 inventors is
that Type 2 inventors tend to be even more confident in their inventions because they
have been able to purchase fancy and costly measuring equipment and have high
quality machining done. However, because of their general lack of education in the
relevant areas of instrumentation, they can misuse the instruments or misinterpret the
resulting data just as bad ly as Type 1 inventors (Reference 21). However, Type 2
inventors have the advantage of being able to purchase external expertise in these
areas (Reference 22). The degree to which they rely on and believe the external
expertise-for example, a university laboratory-is dependent on several factors, most
notably the personality of the inventor himself. The more self-assured personality relies
less on outside expertise.
Type 2 inventors generally have more to lose in terms of money, as they typically start
out big and want to go bigger faster. They tend to investigate less speculative areas of
7
UNCLASSIFIED/ ,'FOR OFFI&ilAL Wili QNL¥
Page 13
UNCLASSIFIED! /FOR OfifilQlalik wse 8HL'I
a technology. Also, they are not generally plagued by the insecurities of the Type 1
inventor about subjecting their inventions to outside scrutiny, and some will be bold
Previous: DOW-UAP-D133 — AAWSAP DIRD, The Space Communication Implications of Quantum Entanglement and Nonlocality, March 2010 · Next: DOW-UAP-D135 — AAWSAP DIRD, Antigravity for Aerospace Applications, March 2010
Same location: Las Vegas, Nevada
- DOW-UAP-D174 — Utah Ranch Investigation Report, April 2010
- DOW-UAP-D166 — MUFON Reports Prepared for BAASS, November 2008
- DOW-UAP-D168 — BAASS Project Management Plan, December 2008
- DOW-UAP-D169 — BAASS Monthly Report, March 2009
- DOW-UAP-D170 — BAASS Monthly Report, April 2009
- DOW-UAP-D171 — BAASS Monthly Report, June 2009
Same period: 2010
- DOW-UAP-D114 — AAWSAP Contract Modification P00003, May 2010
- DOW-UAP-D113 — AAWSAP Contract Modification P00002, February 2010
- DOW-UAP-D115 — AAWSAP Contract Modification P00004, May 2010
- DOW-UAP-D116 — AAWSAP Contract Modification P00005, September 2010
- DOW-UAP-D131 — AAWSAP DIRD, The Role of Superconductors in Gravity Research, March 2010
- DOW-UAP-D133 — AAWSAP DIRD, The Space Communication Implications of Quantum Entanglement and Nonlocality, March 2010
Same release: Release 06
- DOW-UAP-PR159 — Historical Film of Reported UFOs, Utah, 1952
- LLE-UAP-PR001 — Unresolved UAP Report, Colorado, 2023
- LLE-UAP-PR002 — Unresolved UAP Report, Colorado, October 2023
- DOW-UAP-PR133 — Unresolved UAP Report, Middle East, 2025
- DOW-UAP-PR135 — Unresolved UAP Report, Middle East, 2025
- DOW-UAP-PR140 — Unresolved UAP Report, Middle East, 2022
Same agency: DoW
- DOW-UAP-D094 — Analysis of Flying Object Incidents in the United States, 1949
- DOW-UAP-D097 — Project Sign Progress Report, 1948
- DOW-UAP-D084 — US Army-Flying-Saucer-Study 1949
- DOW-UAP-D155 — Air Intelligence Information Report, Saudi Arabia, 1957
- DOW-UAP-D176 — Triangular UAP AARO Memorandum for Record, 2026
- DOW-UAP-D177 — Unresolved UAP Report, Catalina Island, 1955