Home › Archive › DoW

DOW-UAP-D122 — AAWSAP DIRD, Invisibility Cloaking Theory and Experiments, March 2010

File DOW-UAP-D122 is a declassified pdf from Department of War, recording an incident dated 3/2/10 at Las Vegas, Nevada, published in Release 06 (2026-09-18). This page carries the original file, its official summary and its full text.

File
DOW-UAP-D122
Agency
Department of War
Incident date
3/2/10
Location
Las Vegas, Nevada
Released in
Release 06 (2026-09-18)
File type
PDF

Topics: AAWSAP & DIRDs

This document is a Defense Intelligence Reference Document (DIRD), a technical reference format used by the Defense Intelligence Agency (DIA) to capture baseline knowledge on a specific topic for later analytic use. DIRDs are best understood as reference and synthesis products rather than as original research. It is one of 38 DIRDs produced under the Advanced Aerospace Weapon System Applications Program (AAWSAP) between 2009 and 2011. Because AAWSAP’s scope permitted a broad range of supporting topics, not every DIRD in the series directly concerns aerospace systems or future threat assessment. The following summary reflects the DIRD’s scope and framing at the time of writing and should not be read as implying current validation of the concepts discussed.

This DIRD surveys the theory and early experiments behind invisibility cloaking, describing several ways an object might be hidden from visual or sensor detection, including camouflage, transparency effects, and optical cloaking that bends light around an object. It focuses mainly on metamaterials, negative refraction, and transformation optics, and reviews experiments that had already demonstrated limited cloaking at microwave frequencies. The report argues that “imperfect” cloaking is physically achievable in some parts of the electromagnetic spectrum, especially for microwaves, but that “perfect” cloaking is not practical because it would require material properties that conflict with the underlying physics. Its overall conclusion is that cloaking is a scientific field with plausible narrow applications, but that useful visible-light cloaking depends more on future theoretical breakthroughs than on conventional advances in materials science.

Open original file · WAR.GOV page

TL;DR

In March 2010 the only thing vanished was the budget for perfect cloaks.

  • DIRD DOW D122, AAWSAP, March 2010, Las Vegas, NV
  • Reviews invisibility theory, metamaterials, microwave cloaking experiments up to 2009
  • Cloaking plausible at microwaves; visible-light cloaking needs future breakthroughs

AI summary

A document titled "Invisibility Cloaking: Theory and Experiments" prepared by the Defense Intelligence Agency in March 2010. It covers camouflage, transparency, and cloaking methods, including optical camouflage, H.G. Wells's "The Invisible Man," and metamaterials. The text discusses theories such as complementary media, curved space, and transformation-based devices, along with applications in optical and microwave cloaking. It references experiments from 2006, historical examples like the Lycurgus Cup, and challenges in developing effective cloaking technologies. The document includes figures and references scientific papers from 2006 to 2009.

Full text

Page 1

UNCLASSIFIED/ /FOA OFFIEIAk Uili ,u1k¥

Defense
Intelligence
Reference
Document
Acquisition Threat Support
2 March 2010
ICOD: 1 December 2009
DIA-08-1003-001

Invisibility Cloaking: Theory
and Experiments

UNCLASSIFIED/ fFOA OFFI&iIAk Uili Ql'lk¥

Page 2

UNCLASSIFIED/ j FOR OFFICIAL USE O14Lf

Invisibility Cloaking: Theory and Experiments

Prepared by:
Acquisition Support Division (DW0-3)
Defense Warning Office
Directorate for Analysis
Defense Intelligence Agency
Author:

AAP Person 68
Administrative Note
COPYRIGHT WARNING: Further dissemination of the photographs in this publication is not authorized.

This product is one in a series of advanced technology reports produced in FY 2009
under the Defense Intelligence Agency, Defense Warning Office's Advanced Aerospace
Weapon System Applications (AAWSA Pro ram. Comments or uestions pertaining to
this document should be addressed to AAP Person 1
AAWSA Program
Manager, Defense Intelligence Agency, ATTN: CLAR/DWO-3, Bldg 6000, Washington,
DC 20340- 5100 .

ii

UNCLASSIFIED//FOR OFEICI0L Wlili 8ftt¥

Page 3

UNCLASSIFIED/ /FOR OFFICIAL USE O14Lt

Contents
Introduction ............................................................................................................v
Camouflage ............................................................................................................ 1
Transparency ......................................................................................................... 3
Cloaking ................................................................................................................. 5

Metamaterials ........................................................................................................ 9
Optical Metamaterials .......................................................................................... 11
Fundamental Problem .......................................................................................... 15
Curved Space ....................................................................................................... 17
Broadband Invisibility .......................................................................................... 19
Implementation ................................................................................................... 20
Optical Cloaking ................................................................................................... 22

Summary.............................................................................................................. 23
References ........................................................................................................... 23

Figures
Figure 1. B2 Stealth Bomber .................................................................................. 1
Figure 2. Optical Camouflage ................................................................................. 2
Figure 3. The Secret Optical Camouflage ................................................................ 2
Figure 4. H. G. Wells's The Invisible Man: Invisibility by Transparency .................. 3
Figure 5. Complementary Media Invisibility Cloak .................................................. 4
Figure 6. Cloaking Shell .......................................................................................... 5
Figure 7. The Invisible Woman ............................................................................... 6
Figure 8. Fermat's Principle ................................................................................... 7
Figure 9. An Optical Material Deforms the Coordinates of Space ............................ 8
Figure 10. Light Waves at Cloaking Device ............................................................. 9
Figure 11. Cloaking Device for Microwaves .......................................................... 10

iii

UNCLASSIFIED/ ,'POR: errl@IAL YSli 8PtLY

Page 4

UNCLASSIFIED/ /FOR OFFl&I.t.k Uili QPIL¥
Figure 12. Lycurgus Cup (British Museum; AD Fourth Century) ........................... 11
Figure 13. Idea for a Cloaking Device for Visible Light ......................................... 12
Figure 14. Advances in Metamaterials .................................................................. 13
Figure 15. Demonstration of Negative Refraction With "Bulk" Optical
Metamaterials Made of Nano-Fishnets ................................................. 14
Figure 16. Demonstration of Negative Refraction With "Bulk" Optical
Metamaterials Made of Nanowires ....................................................... 15
Figure 17. Fundamental Problem of Transformation-Based Cloaking Devices ...... 16
Figure 18. Wave Packets are Made by Combining Waves With Different
Frequencies......................................................................................... 17
Figure 19. Stereographic Projection ..................................................................... 18
Figure 20. Non-Euclidean Cloaking Device in Two Dimensions ............................. 19
Figure 21. Three-Dimensional Cloaking ................................................................ 20
Figure 22. Coordinate Transformation Implemented by a Ground-Plate Cloak..... 21
Figure 23. Implementation of the Ground-Plate Cloak ......................................... 21

iv

UNCLASSIFIED/ /fOll OPPl@IJIIL U:!I!! er~t"f

Page 5

UNCLASSIFIED/ /POlt OfFI@Il.tk WIiii QJslL¥

Invisibility Cloaking: Theory and Experiments
Introduction
The idea of invisibility has fascinated people for millennia, inspiring many
myths, novels, and films. Invisibility cloaking has recently become a subject of
science and technology. This paper describes the important current theoretical
and experimental developments and tries to project into the future.

V

UNCLASSIFIED/ /fOR OFFI&l.t.k WIiii QI\IL¥

Page 6

UNCLASSIFIED/ /FOA OFFI&Il.tl l::181: 8HL'f

Camouflage
Invisibility may be achieved through three principal methods: camouflage,
transparency, and cloaking. Many an imals and some plants use camouflage to disguise
themselves from predators-for example, by assuming the shapes and colors of objects
in their surround ings. The military has long used forms of camouflage; a recent military
application of camouflage is stealth technology.
Stealth planes have aerodynamically
unusual, edgy shapes and are coated
with a special material. Both features
serve the same purpose: to make the
plane " invisible" to radar. How does it
work? In radar, electromagnetic
microwaves are emitted by a source, and
thei r reflection by an object-an
airplane, for example-is detected. From
the direction and the t ime delay of the
reflected waves, the direction and
distance of the object are inferred. If the
object does not reflect the
electromagnetic microwaves back to the
source, it will not appear on the radar.
This is precisely what stealth technology
achieves. Owing to t he edgy shape of
Figure 1. B2 Stealth Bomber
the stealth plane, most of the incident
electromagnetic waves are reflected in different directions; the coating of the plane
absorbs the rest. In this way, the stea lth plane has become completely black in t he
spectral range of radar. As for radar waves, the sky is black, not blue, and the plane
has assumed the color of the background: the stealth plane is camouflaged.

1

UNCLASSIFIED/ /&iOA: OFFICl.t.k W&li 8,.lY

Page 7

UNCLASSIFIED/ /FOA OFFI&I.t.k Wfili 8,.LY
Another recent example of camouflage is
optical camouflage, developed by the
University of Tokyo's Tachi Laboratory.
Figure 2 shows an example of optical
camouflage. A camera captures the
background scene behind the person.
The image is processed and projected
onto the person via a semitransparent
mirror. The person wears an "invisibility
cloak" made of a retroreflective material
that reflects light back in t he direction
whence it came, like cats-eye-reflectors
do. As the cloak carries the projected
image of the background, t he person
seems to disappear, but surely the
equipment standing around the person is
clearly visible. In addition, optical
camouflage works only in one direction;
seen from the side, the person is visible.
Nevertheless, optica l camouflage may
become a useful tool in some situations
Figure 2. Optical Camouflage (Tachi Laboratory,
where obstacles are in the way of sightfor example in surgery, where the
Tokyo}
surgeon's hands and instruments may
obstruct the view. Figure 3 shows how optical camouflage works.

I JJ f"n>Jl'<to<
rt,.,,.. Ol"'J irlf' .-n•,r
,_.1111 thr,t.i.,.,.

The S~cret of Trollnsparent croalc

Figure 3. The Secret Optical Camouflage (Tachi Laboratory, Tokyo)

2

UNCLASSIFIED/ /FOP OFFICIO P I !iii ODIL¥

1

Page 8

UNCLASSIFIED/; POI\ OPPICIAL U.!I!! er•tY

Transparency
H. G. Wells's novel The Invisible Man
represents another strategy for
becoming invisible: transparency.
In Wells's novel, the invisible man, a
disgruntled college professor, invents a
substance that somehow changes the
refractive index 1 of his body. Most
transparent substances, like glass, air,
or water, modify the speed of light,
because the atoms or molecules of these
substances absorb and re-emit light,
which takes time. The delay caused by
the atoms and molecules results in a
reduced speed of light and hence in a
refractive index larger than 1. It is,
however, also possible to achieve a
refractive index smaller than 1, although
only in narrow bands of the spectrum. In
these cases, the atoms or molecules
Figure 4. H. G. Wells's The Invisible
advance the wave fronts of light because
Man: Invisibility by Transparency
they are excited such that their electron
clouds oscillate ahead of the light. If the refractive index is uniform in a material, light
is reflected and refracted at the boundary but otherwise is traveling straight through.
On the other hand, if the refractive index varies, light is scattered at the index
inhomogeneities and gets lost. Most white substances appear white because of such
scattering . Milk, for example, consists of minuscule oily droplets-fat-in water. The
refractive index of the droplets differs from water, and hence light is scattered at them;
it does not penetrate the substance, and the diffused light appears as white. Now,
human bodies are visible, because they absorb light. Most of the absorption is due to
the scattering of light in biological tissue, in the cells of which the bodies are made. If
the refractive indices of a person's cells could somehow be changed to the refractive
index of air, the person would become transparent and disappear from view-like the
Invisible Man.
Some animals (for example, some jellyfish) are transparent, but the cells of higher
order animals are usually much too complex and diverse for transparency to become a
serious option for disguise. Exceptions are the transparent parts of the body, most
notably eye lenses, which consist of uniform cells kept in a state between life and
death. If this balance is upset, the lenses become opaque as a cataract develops.
Transparency is the idea behind some proposed forms of invisibility by technology. For
example, in plasmonic covering, 1 a particle should be surrounded by layers made of
metals and transparent substances, such as glass. The layers are designed such that
they cancel the scattering of light at the particle, hence making both the particle and
the layers transparent-that is, invisible. Another proposal 2 exploits the resonance of
the particle with a negative-refractive material that cancels out scattering. In a material
with negative refraction, the wave fronts of light appear to move in the opposite
1 The refractive index is the ratio between the speed of light in vacuum and the speed of light in a material.

3

UNCLASSIFIED//5O9 OEEICI0 .. Uili QPlkY

Page 9

UNCLASSIFIED/ /FOR OFFl@IAL YSE OHL¥
direction from the pro pagation . The clearest and most advanced form of this concept is
t he complementary media invisibility cloak. 3 Here, an optical antiobject is placed beside
the object one wishes to make disappear. The antiobject should be made of a
negatively refract ive materia l that exact ly compensates the optica l appearance of t he
object. An image is contain ed in the deformations of light-wave fro nts cau sed by the
imaged object. If these deformations are reversed, the image disappears, and t he
object becomes tra nsparent- that is, in visible. The optica l antiobject must be tailored to
the object and placed precisely at t he correct dista nce-that is, the distance where it is
made to ca ncel the image of t he object. The more complex t he object is, the more
com plex t he antiobject must be for reversing all the scatt erin gs of light. Such cloaking
at the distance ca nnot be instantaneous, as the lig ht scattered by both object and
antiobject must settle t o a st ationary state where it becomes synchronized. A stationary
light field has only one color. So, in practice , these forms of tra nsparency will work only
for small objects and for small parts of the spectrum and not for large objects in ma ny
colors.

b)

a)

ob' µ 1m

-L

-L

L

0

.

c)

0

L

..

,,

d)

,,

•

I

,,

,,

I

,

I
I
I

I

I

'

I

I
I

,
,,

I

I

I

'

I

I

- ____ -··
,,,.

,

,,

.

,I

I

'µob

----- --·

Figure 5 . Complementary Media Invisibility Cloak: (a) The slab of empty space x with O < x < Lis optically
canceled by a slab of negative-index material in -L < x < 0. (b) The same cancellation effect works with an object
in O < x < L if the negative-index slab contains an antiobject. (c) A spherical shell b < r < c is optically canceled by
a negative-index shell a < r < b. If the corer< a is optically equ ivalent to a sphere of rad ius c, then this device ls
invisible. (d ) The same as (c), but with an object in the canceled shell b < r < c. The object is cloaked : both it and
the cloa king sphere are invisible .

4

UNCLASSIFIED/ /POlt orrlCIJ!!tt 05E: 014[ I

Page 10

UNCLASSIFIED// POI\ OPPICIJ!tt l!l!H! e ..tv

Cloaking
Cloaking 4 • 5 is a universal strategy for invisibility that works for objects of arbitrary
compositions and shapes within a given size. In cloaking, the hidden object is enclosed
by the cloaking device, a transparent shell that guides light around the object as if the
light would propagate through empty space. In this way, both the interior of the
cloaking device is hidden and the act of hiding is concealed.

Figure 6. Cloaking Shell 6

How does one find the right design for such a cloaking device? As the Invisible Man
symbolizes transparency as a strategy for invisibility, inspiration for cloaking may come
from the Invisible Woman, a cartoon figure from the Fantastic Four. The Invisible
Woman is said to create a mysterious force field around her that bends space. Lig ht
follows the curved space such that it smoothly flows around the Invisible Woman, like
water in a stream flowing around an obstacle. The key idea here is the concept of
curved space used for invisibil ity. The idea that turns the Invisible Woman with her
fabled force field from a fictitious character into something close to reality is the insight
that no force field is needed, that light-refracting materials like glass or water appear as
curved spaces by themselves .

5

UNCLASSIFIED/ }FOA OFFICIO .. Uili 01"1 ..¥

Page 11

UNCLASSIFIED/, FOR OFFICIAL USE Oilti
This idea comes from Fermat's principle
of the shortest optica l path. 7 Suppose
that light travels from A to B. According
to Fermat's principle, light follows the
path that takes the shortest time. In
refractive materials, the speed of light is
modified-in most cases reduced-by the
refractive index. The time it takes for
light to pass through an infinitesimal
element of space is proportional to the
refractive index. So, if the index varies
in an optical material or in the
boundaries between materials, the
optical measure of path length varies,
which is the defining feature of a curved
geometry. To provide a simple example,
a lens focuses parallel light rays into a
point; the parallels meet there, which is
the hallmark of a non -Euclidian
geometry. So something as familiar as a
lens creates something as fantastic as a
curved geometry.

Figure 7. The Invisible Woman. Invisibility by bend ing
light, an inspiration for cloaking.

6

UNCLASSIFIED/ }FOR. 8FFIEiIAL YSE 8HL1/

Page 12

UNCLASSIFIED/ /FOlt 8PPl@IAL YSI: 8,.LY

Figure 8. Fermat's Principle. The grey level indicates the refractive index. In traveling from A to B, light follows
the path that takes the shortest time, traveling, if possible, through regions of low index .

The bending of light in materials or, equivalently, the change of the spatial geometry by
optical materials is the cause of most optical illusions. For instance, the figure used to
illustrate Fermat's Principle shows the path of light in a mirage. The air above a hot
surface, hot tarmac, or desert sand is hotter than the air farther above. As hot air is
thinner than cooler air, the refractive index is lower above the hot surface. Light rays
are bent upwards, conjuring up images of water in the distance that, in reality, are
images of the sky. Such optical geometries may also be employed for creating the
ultimate illusion: invisibility. Imagine an optical material changing the geometry of
space, as shown in Figure 9 below.

7

UNCLASSIFIED/;CFOA OFFitl.t.k W&lii 0PUslf

Page 13

UNCLASSIFIED/ fFOR: 8FFI@IAL Y!H! 9HL'f

B
I I

_,__

,,. ,...

,
_""""T, ...._ ~- - - '

I

I

I i

I

I

-

.,

I

I i

I

I I

I

I

I

I

I

I

I

I

I

'

I

I

1'\
\

. .. '-"- ·•-~
I
I

-'- I ·- --.+- ··-·-r
___
_,_,_

I

-~'

I

I

_..____._

\

I

......
I

I I I

- i - _ ,_

I

I

:-... I

I .1

-

I

-1-

_ ,

i-

I

- ·- t -

1./

..I .

~roe: _

~

.!.,, ,.,.

-

I I
I

I

'

I

I I
I

I

I

I

Figure 9. An Optical Material Deforms the Coordinates of Space. A: virtual space, B: real space.

The material acts like a transformation of space. In the device, each point in real space
is put to a new location in a virtual space (outside of the device, space remains the
same). The device creates the illusion that light propagates along straight lines through
the virtual space, whereas in reality it is bent. Suppose the device encloses a hollow
region that is not part of t he virtual space or, to be more precise, a region with a
surface that, in virtual space, has become a single point. The red circle in Figure 9B is
reduced to the red dot in Figure 9A. As the hollow region is not part of the virtual space
where light propagates, everything inside it has become invisible. As the coordinates of
virtual space smoothly go over into the coordinates of real space at the outer surface of
the device, light rays are not distorted. Any object inside the cloaking device is hidden,
and so is the act of hiding itself. Moreover, the cloaking device not only would bend
light rays but would modify the entire structure of lig ht waves in such a way that
detecting the hidden object is impossible. Light waves would advance around the
hidden core of the device, engulfing it, as Figure 10 shows. 8

8

UNCLASSIFIED//EOA: OEEICI0 .. Uili OPU:¥

Page 14

UNCLASSIFIED/ ,'FOR: OFFl@IAL l!ISI!!! 9HLY

Figure 10. Light Waves at Cloaking Device. Wave propagation in (a) virtual space and (b) real space .

This idea of cloaking by coordinate transformations was put forward by two
independent groups. Their theories appeared in Science Express on 25 May 2006 and
were published back to back in Science magazine later on. The first paper9 only
considered isotropic materials, optical materials where the speed of light at each point
is the same in each direction but may vary from point to point. Most natural optical
materials, except for some crystals and all liquid crystals, are isotropic. In isotropic
materials, invisibility is perfect only for light rays, but the cloaking device may cause
dislocations of lig ht waves. In addition to the optical implementation of coordinate
transformations, some other tricks are required. The second paper 10 considered
anisotropic materials for cloaking or other manipulations of electromagnetic waves.
Here, perfect invisibility is possible in principle (but not in practice, as is discussed
later). I n October 2006, the first cloaking device was demonstrated, 11 for microwaves.
Science magazine regarded cloaking as one of the top 10 science breakthroughs of the
year (it was top in physics and engineering) . Scientific American listed the inventors of
cloaking devices-Sir John Pendry, David Smith, David Schurig, and Ulf Leonhardt­
among the top 50 policy, business, and research leaders of the year. The first paper 12
on cloaking had initially been rejected by most major science and physics journals
before it finally appeared in Science, but since 2006, cloaking has become a
mainstream subject on which about a thousand papers have been published so far.

Metamaterials
The first prototype 13 of a cloaking device was designed to operate in the microwave
region of the electromagnetic spectrum, for a wavelength of about 3 cm. The device
consists of 10 rings of flexible circuit board. The copper of the circuit board has been
etched away, apart from characteristic structures of about 3-mm size, so-called split­
ring resonators.

9

UNCLASSIFIED//509 OFFICIOP 1!55 ODtf PX

Page 15

UNCLASSIFIED/ fFOlil OFFI&Ilil l:ISE 8Hl¥
The split-ring resonators are
electromagnetic circu its; they respond to
the electromagnetic field of microwave
rad iation. Their response depends on
their shapes. For example, in the
cloaking device shown in Figure 11, the
double stripes in the middle of the split­
ring resonators vary from ring to ring. As
these stripes form an electric capacitor,
the capacitance of the resonators also
varies. The colored curves show how the
electromagnetic functions change over
the distance from the center of the
cloaking device as a result of the varied
capacitance. As they are always positive,
negative refraction is not required for
cloaking. At the inner ring, the red curve
reaches zero, defining the boundary of
the cloaking device. The rings with their
split-ring structures are designed to
Figure 11. Cloaking Device for Microwaves 14
perform an approximation of the
coord inate transformation shown and explained in the previous section. How is this
possible? The split-ring resonators act like the atoms or molecules of a normal optical
or electromagnetic material : they absorb electromagnetic waves and re-emit them with
a phase delay or advance that depends on their electromagnetic response. Like atoms
or molecules, they are much smaller than the electromagnetic wavelength-3-mm cell
size versus 3-cm wavelength in the case of the microwave cloaking device 15 - such that
the waves cannot resolve them individually but, rather, react to them as if they were a
bulk material with electromagnetic properties that may differ from point to point. Unlike
atoms or molecules, the electromagnetic response of each sp lit-ring resonator is tailor­
made because it depends on the shape of the resonator that can be easi ly modified.
For example, in the case of the microwave-cloaking device, 16 the electromagnetic
response depends on the capacitance that is varied by changing the length of the
double stripes in the resonators. An unstructured circuit board reacts completely
differently to the microwave radiation: it would simply reflect it like the mesh in the
window of a microwave oven. A material with electromagnetic or optical properties that
depends on structures much smaller than the wavelength is called a metamaterial.
Metamaterials per se are nothing new; the ancient Romans invented the first optical
metamaterial: ruby glass. The Romans probably did not know it, but their recipe for
ruby glass contained one crucial ingredient:17 tiny gold droplets, typically 5-60
nanometers (nm) in size. These gold particles color the glass in an extraordinary way,
as demonstrated by the exquisite Lycurgus Cup shown in Figure 12. In daylight, the cup
appears a greenish color, but illuminate it from the inside, and it glows ruby. The gold
particles act like the split-ring resonators of the microwave-cloaking device, 18 but here
on light, not on microwave radiation . Light consists of electromagnetic waves as well,
but with significantly smaller wavelengths of around 500 nm. The gold particles are
thus much smaller than the wavelength of light, and they turn out to be resonators as
well: in them, electric currents flow in a way that is dictated by their shapes and sizes.
When the light wave hits the resonance of the gold particle, most of its energy is
10

UNCLASSIFIED//EOA: OEEICI C.. Uili OPU1¥

Page 16

UNCLASSIFIED/ /FOR: OFFl@IAL l!ISI!!! 9HL'f
converted into the electromagnetic oscillation of the gold particle in much the same way
a tun ing fork responds to sound of the r ight frequency .
However, the electromagnetic oscillation
is damped out by the electric resista nce
in the metal, and its energy is absorbed
and ultimately turned into heat. The
color of light corresponds to the
frequency or wavelength . If one of the
frequencies is absorbed, the
correspond ing color is missing in the
spectrum. For the gold particles in the
Lycurgus Cup, th is color is green; a
spectrum with green missing appears
red, which produces the cup's exquisite
color. (Light is also scattered in the
material, and this scattering is enhanced
near the green of the resonance; hence
the greenish color of the cup seen in
daylight.)

Figure 12. Lycurgus Cup (British Museum; fourth
century AD). This Roman cup is made of ruby glass.
When viewed in reflected light- fo r example, in daylight ­
it appea rs green. However, when a light is sh one into the
cup and transmitted thro ugh the glass, it appea rs red .
The cup illustrates t he myt h of King Lycurgus. He is seen
bei ng dragged into the underworl d by the Gree k nymph
Am brosia, wh o is disguised as a vine.

What is new about metamaterials is t he
degree of control on their struct ures
achieved by applying modern technology
and the level of theoretica l
understanding of their workings. The Romans most probably never understood why
ruby glass is neither golden like gold nor transparent like glass, its ingredients, but
ruby . They did not know that light is an electromagnetic wave, nor did they know the
basic laws of electromagnetism . And they would not have had the technolog ical tools to
use this knowledge in the design of novel optical metamaterials.

Optical Metamaterials
As light is simply an electromagnetic wave with shorter wavelengths t han microwave
radiation , one could imagine an optica l cloaking device as the microwave cloak but with
much smaller cells, fitted to the smaller wavelength. However, this simple idea is t oo
simple, for two different reasons. One is that metals like the copper of the circuit board
or the gold of ruby glass are more electrically resistant to currents oscillating with the
frequency of visible light than to currents in the microwave range of the spectrum.
Second, and more important, the cells of a metamaterial also emit electromagnetic
rad iation in an incoherent way, not just as a coherent response to the incoming
electromagnetic wave, similar to the spontaneous emission of light by atoms and
molecules. The spontaneous emission is significantly stronger in the optical range of the
spectrum. In short, metamaterials do not scale; they must be designed differently for
visible light, and the loss of light by absorption and incoherent scatter ing usually is
greater for visible light than for microwaves. Figure 13 below illustrates the idea 19 for
an optical cloaking metamaterial. Instead of split- ring resonators, nano-scale metal
wires are embedded in a transparent host material, for example glass. The wires
replace the split-ring resonators on the ci rcuit board of the microwave-cloaking device .
They act similarly to the gold particles embedded in ruby glass; their optica l properties
11

UNCLASSIFIED/ /EAR OFFICIO! I 155 ODIL¥

Page 17

UNCLASSIFIED/ /POR: errl@IAL YSI: 8HLY
depend on t heir lengt hs and on their arrangement, which, in principle, can be tailor­
made and controlled using the tools of modern nanotechnology. The thin wires will have
lower electric losses than split-ring resonators, and their radiation losses by the
equivalent of spontaneous emission are reduced as well. Such optical cloaking devices
do not yet exist, but one can gauge the progress in the required technology by
considering the progress in negatively refracti ng optical materials.

Figure 13. Idea for a Cloaking Device for Visible Light. Metal nanowires replace the split- ring resonators of
the microwave cloaking device. Coordinate transformation and structure of the optica l cloak. a: The coordinate
transformation that compresses a cylindrical region r < b into a concentric cylindrical shel l a < r < b. There is no
variation along the vertical direction. The radii rl and r2 define the internal and external radius of a fraction of the
cylindrical cloak . b: A small fraction of the cylindrical cloak. The wires are all perpendicular to the cylinder's inner
and outer interfaces, but their spatial positions do not have to be periodic and can be random .20

Figure 14 below 21 illustrates the route toward achieving negative refraction in t he
visible range of the spectrum. Losses typically are a greater problem for negatively

12
UNCLASSIFIEDJ;<fOA OFFitI.t.k Wlili QPUsY

Page 18

UNCLASSIFIED/ /POlt 8FFl@IAL lel§li 8PUs:lf
refractive materials than for the metamaterials of cloaki ng devices. So the graph
indicates the possible progress toward optical cloaking.

1000

100

10

•

0.01

2000

001

00

001

Figure 14. Advances in Metamaterials. The sol id symbols denote materials with negati ve refract ion; the open
symbols denote optical materials with negative magnetic response . Orange : data from structures based on th e
double split-ring resonator (SRR) ; green : data from U-shaped SRRs; blue : data from pairs of metal lic nanorods ;
red : data from the "fishnet" structure. The four insets give pictures of fabricated structures in different frequency

Text continues in the original file (29 pages).

Previous: DOW-UAP-D121 — AAWSAP DIRD, Pulsed High-Power Microwave Source Technology, January 2010 · Next: DOW-UAP-D123 — AAWSAP DIRD, Positron Aerospace Propulsion, March 2010

Story: The Pentagon paid $21.9 million for warp drives, wormholes and invisibility cloaks: the receipts

Same topic: title & summary match

Same location: Las Vegas, Nevada

Same period: 2010

Same release: Release 06

Same agency: DoW