Home › Archive › DoW

DOW-UAP-D118 — AAWSAP DIRD, Aerospace Applications of Programmable Matter, December 2009

File DOW-UAP-D118 is a declassified pdf from Department of War, recording an incident dated 12/14/09 at Las Vegas, Nevada, published in Release 06 (2026-09-18). This page carries the original file, its official summary and its full text.

File
DOW-UAP-D118
Agency
Department of War
Incident date
12/14/09
Location
Las Vegas, Nevada
Released in
Release 06 (2026-09-18)
File type
PDF

Topics: AAWSAP & DIRDs

This document is a Defense Intelligence Reference Document (DIRD), a technical reference format used by the Defense Intelligence Agency (DIA) to capture baseline knowledge on a specific topic for later analytic use. DIRDs are best understood as reference and synthesis products rather than as original research. It is one of 38 DIRDs produced under the Advanced Aerospace Weapon System Applications Program (AAWSAP) between 2009 and 2011. Because AAWSAP’s scope permitted a broad range of supporting topics, not every DIRD in the series directly concerns aerospace systems or future threat assessment. The following summary reflects the DIRD’s scope and framing at the time of writing and should not be read as implying current validation of the concepts discussed.

This DIRD describes “programmable matter” as smart materials whose properties can be changed on command, potentially allowing spacecraft components to change function through software updates rather than physical repair or replacement. The report suggests that such materials could someday enable adjustable sensors, smart windows, heat control, energy collection, active camouflage, and systems that switch between different functions, making spacecraft more flexible and adaptable. At the same time, it presents the idea as highly speculative and emphasizes major technical obstacles, including manufacturing at extremely small scales, shielding against radiation and electromagnetic interference, managing temperature effects, reducing component failures, and preventing hacking or malicious control. Overall, the document presents programmable matter as a promising long-term concept over the next 50 years, while judging that simpler near-term uses such as smart windows and energy-saving surface materials are far more realistic than the more ambitious aerospace applications.

Open original file · WAR.GOV page

TL;DR

December 2009: even programmable matter needs a date to stay organized.

  • DIRD DOW-UAP-D118, Defense Intelligence Agency, December 2009, Las Vegas, Nevada
  • Describes speculative programmable-matter concepts for spacecraft, smart windows, energy management, camouflage, etc.
  • No official conclusion in the file

AI summary

A document titled "Aerospace Applications of Programmable Matter" prepared by the Defense Intelligence Agency in December 2009 outlines four types of atoms and discusses photonics, metamaterials, and smart materials. It covers programmable matter including photonic crystals, superlattices, and liquid crystals, describing materials that can change optical, electrical, and magnetic properties. The text includes information on dynamic windows, energy efficiency, and energy harvesting methods like Peltier junctions and piezoelectric effects. It also addresses challenges in fabrication, temperature sensitivity, and radiation resistance, with references to spacecraft systems and future projections.

Full text

Page 2

UNCLASSIFIED/ /P'9R 9fP'!@IIIIL ~!IE 8HLY

Aerospace Applications of Programmable Matter

Prepared by:
Acqu isit ion Support Division (DW0- 3 )
Defense Warning Office
Directorate for Analysis
Defense I ntelligence Agency
Author:

AAP Person 90

Adm inistrative Note
COPYRIGHT WARNING : Further dissemination of t he photographs in t his publicat ion is not authorized .

This product is one in a series of advanced technol ogy reports produced in FY 2009
under the Defense Intelligence Agency, Defense Warning Office's Adv anced Aerospace
Weapon System Applications (AAWSA}.,..,i..i.~u.u.u.....:...w.i..u.u~i..i,....w.i....cUestions pertaining to
this document should be addressed to AAP Person 1
AAWSA Program
Manager, Defense I ntelligence Agency, ATTN: CLAR DWO- 3, Bldg 6000, Washington,
DC 20340- 5100.

ii

UNCLASSIFIED//508 QEEICJtk 1:161! 8HL'l

Page 3

UNCLASSIFIED//FOR- CHAL OSE ONLY
Contents
Introduction..
Four Kinds of Atoms
Natural Atoms ..
Quantum Dots
Photonics and Metamaterials 3
Liquid Crystals
"Impossible" Materials..
Advantages of Dynamic Materials
Early Commercialization of Smart Materials
Thermal Management of Spacecraft .....
Energy-Scavenging Spacecraft Skins.
Advanced Concepts in Programmable Materials .... 12
Scenario for Possible Applications...... … 13
Directions for Future Research. 14
Conclusions.. 16
Figures
1. Energy Levels of a Metal and a Semiconductor ....... 2
2. Quantum Dot.... 3
3. Programmable Materials .... 3
4. Wellstone Fiber. ... 6
5. Assorted views of RavenWindow and RavenLight Filters in the Cold
(Transparent) and Hot (Reflective) State... 8
6. RavenWindow Smart Window Film Performance vs. Leading Incumbent Window
Filters...
7. Peltier Junction Heat Pump .. 10
Tables
1. Daily Household Energy Consumption (USA, 1993-1997). 11
iii
UNCLASSIFIED//POR OFTICIAL

Page 4

UNCLASSIFIED/ j FOR OFFICIAL O!JE OIILT

Aerospace Applications of Programmable Matter
Introduction
For the owners of a $100 million satellite-a TV broadcast satellite, for
example-avoiding bankruptcy often depends on the spacecraft's continued
good health until its scheduled replacement is in orbit. Unfortunately,
numerous failure modes are possible, including blown fuses, failed sensors,
and browned-out solar arrays. The common trait of most such failures is that
they cannot be repaired from the ground. In addition, it is not typically
possible to repurpose a spacecraft or its components for new services that no
one foresaw at the time of manufacture. Either way, a new satellite is required.
However, when sensors, filters, emitters, and photovoltaic solar panels are
made of Programmable Matter smart materials, the solution to a component
failure or new mission requirement might be as simple as a software update.
Other advantages of dynamic materials include advanced energy management
and energy scavenging from a variety of sources. Smart materials can even
create new defensive capabilities, such as chameleon-style camouflage,
deflection of laser beams, and even outright invisibility.
If it becomes possible to change the properties of certain materials on demand,
based on remotely triggered instructions, the benefits for spacecraft-both
crewed and autonomous-will be considerable. This white paper-by no means
an exhaustive reference-is intended to serve as a primer on the principles
behind smart materials and their possible aerospace applications over the next
50 years.

iv

UNCLASSIFIED//liQR Qfli1&'10L: P!iii Ctr! Y

Page 5

UNCLASSIFIED//FQR 8Ffl@l!illt ~9E tHILI

Four Kinds of Atoms
All matter is made of atoms and derives its properties, in part, from the fact that atoms
are discrete objects yet are so small and so close together that light waves cannot "see"
them individually. By extension, neither can electric and magnetic fields. To a photon,
or to a large electrical current, matter appears to be made up of continuous substances
rather than discrete building blocks. This fact is critically important in understanding the
optical, electrical, and even thermal properties of materials. Equally important are the
discoveries of recent decades, showing at least four different kinds of "atoms" that
meet this same general description.

NATURAL ATOMS
Natural atoms are the 92 elements of the periodic table. Actually there are more, but
the rest have unstable nuclei that will eventually fly apart Into smaller atoms and loose
subatomic particles that can damage the materials around them. For engineering
purposes, this makes them unreliable building blocks.
However, 92 building blocks allow for a staggering number of combinations, and all the
materials with which we are familiar-natural ones like coal and diamonds, ancient ones
like bronze and glass, and modern ones like silicon carbide and gallium arsenide-are
merely "Tinkertoy" sculptures of these natural atoms.

QUANTUM DOTS
A quantum dot is a very small grouping of tightly confined electrons whose collective
behavior resembles that of a natural atom. For this reason, quantum dots are
sometimes known as "artificial atoms."
To describe how this trick is accomplished, it is first necessary to talk about electrons
and how they behave. Most materials are either conductors, which permit the free flow
of electrons, or insulators, which resist it. Semiconductors are insulators that are
capable of conducting electrons above a certain threshold energy-a useful trick that
makes integrated circuits and other electronics possible. The most familiar
semiconductor is silicon, which is used to make the vast majority of microchips found in
tod;;iy's consumer ;;ind industri;;il electronics. Aecl;'l~1se silicon's n;;itive Q){ide, SiO?, is the
main component of sand and rocks, it is readily available and relatively inexpensive. In
addition, when melted, purified, and hardened into sheets, silicon dioxide serves as one
of our familiar insulators and building materials: glass. Unlike most other
semiconductors, silicon is also nontoxic.
The electrical properties of a semiconductor like silicon are of course fixed by the laws
of physics. Atoms hold electrons in shells that increase in size, capacity, and potential
energy the farther they are from the nucleus. "Valence" electrons are found in full (or
nearly full) shells, where there are few empty spaces through which electrons can
move. These electrons tend to stay at home, so their levels exhibit a large electrical
resistance and do not permit electricity to flow. "Conduction" electrons are found in
shells that are more than half-empty and have lots of open space, enabling electrons to
travel freely through them and move easily from one atom to another. Between these
layers is a "band gap" of forbidden energies. Here, there exist no electrons at all-ever.
1

UNCLASSIFIED/ /1'8R: err1e111111: l!ll!H! 8Hlf{

Page 6

UNCLASSIFIED// FOR OFFICIAL USE 01\Lf

----►

Conduction Band

>­

CJ

a:
w
zw

Conduction Band
Band Gap

CJ

z

C/)

<(

w
a:

Valence Band

()

z

Metal

Semiconductor

Figure 1. Energy Levels of a Metal and a Semiconductor. In a metal, many electrons reside in the conduction
band and can be pushed to neighboring atoms with only a tiny addition of thermal or electrical energy. In a
semiconductor, enough energy must first be added to excite the electron out of the valence band, across the band
gap, and into the conduction band. Thus, to conduct electricity, semiconductors require much higher voltages and
temperatures than do metals.

Electrons below the band gap of a semiconductor behave as though they were in an
insulator, while electrons above the band gap behave as though they were in a
conductor. They flow easily and can be used to store or transport energy and
information.
The difference between a metal and an insulator is that the outermost electron shell of
a metal atom is more than half-empty. It has lots of conduction electrons and lots of
room for them to move around. An insulating material, such as sulfur, has an outer
shell that is almost completely filled. All its electrons are valence electrons­
homebodies that do not like to travel. Semiconductors have outer shells that are
approximately half-filled . With the input of energy, their electrons can jump to a higher
level where they find open space to travel through. Conduction electrons can also be
"donated" by neighboring atoms.
A "quantum dot" is simply a very small structure-usually on the order of 5-20
nanometers-that contains a modest number of conduction electrons, which it confines
in all three dimensions and prevents from leaving the structure. In addition, because
the Heisenberg uncertainty principle requires position uncertainty to increase when
particle momentum is restricted, the trapped electrons are unable to hold a well-defined
position and instead behave as standing waves that resemble the orbitals of, and
exhibit many of the same properties as, a natural atom.
However, there are two major differences between a quantum dot and a natural atom.
First, there are far more than 92 possible configurations-an infinite number, in fact­
for the confined electrons. Thus, with quantum dots it is possible to create designer
atoms with properties that simply do not occur on the periodic table. If we want to, we

2

UNCLASSIFIED/ /FOR Offl@IAL l:t:91!! 9NLY

Page 7

UNCLASSIFIED//f8R 8FFHilAI: Wli& (Ulkl/
can exert precise control over their optical, electrical, thermal, and magnetic properties
rather than simply selecting these properties from the limited catalog nature has
provided.

Barrier
Figure 2. Quantum Dot. A quantum dot confines electrons in a very small volume of space, fo rcing them to
behave as standing waves. Their structure t hus resembles the electron clouds or "orbitals" of an atom.

Second, it is possible to pump electrons in and out of a quantum dot using electric
fields. Thus, instead of a single designer material, it is possible to create a
programmable material whose "atoms" can be changed on demand, allowing a bounded
but infinite variety of material properties that can be summoned or dismissed at will.

.......!.!....

:::r:
Confined
___,,_ __ Electrons

Figure 3. Programmable Materials. Various structures use electric fields to vary the confinement properties of
quantum dots and can be assembled into bulk materials.

PHOTONICS AND METAMATERIALS
"Sub-wavelength" features are objects implanted on or embedded in a transparent
material that are larger than atoms or molecules but smaller than a wavelength of light.
They can have significant effects on the optical properties of the material, since they
change the way it responds to electric and magnetic fields. However, because they are
too small to be "seen" by the photons interacting with them, they do not directly block
the passage of light. The result is a transparent material whose optical properties
3

UNCLASSIFIED/ /F&R &FFi&iAk W&& &•lk\f

Page 8

UNCLASSIFIED/ /P9R err1e11111:: W&I &His¥
(permittivity, permeability, index of refraction, and coefficients of reflection,
transmission, and absorption) do not necessarily match those of any natural material.
Photonic crystals exploit this principle by varying the density or refractive index of a
material in a regular, periodic way. Just as light is affected by the spacing of atoms in a
natural crystal, it can be affected by the (much larger) spacing of sub-wavelength
features in a photonic crystal. Thus, photonic crystals can efficiently reflect some
wavelengths of light while absorbing, transmitting, bending, or scattering others. This
can be useful, for example, in telecommunications, where a single optical fiber may
carry thousands of different signals. Because similar effects occur naturally in many
gemstones (opal, for example), photonic crystals can also serve as artificial gems.
Whereas photonic crystals are generally insulators, another class of materials-called
superlattices-is made from semiconductors, metals, and other substances stacked in
very thin layers. Such materials "look" like crystals to the electrons and photons moving
through them but can have properties that do not occur-or occur only weakly-in
nature. Two examples are "magnetoresistive" materials made from alternating layers of
iron and a nonmagnetic material such as chromium, Even in very tiny quantities, such
materials can be used to sense magnetic fields with much greater sensitivity than can
any natural material and are widely used in hard disk drives and digital compasses.
In a "metamaterial," the sub-wavelength features are conductive metals surrounded by
a transparent dielectric material such as glass, air, or empty space. In much the same
way a metal rod interacts with radio waves and can thus serve as an antenna, the
"atoms" of a meta material create strong resonances at particular wavelengths that can
have more profound effects on light than can any of the material systems described
above. The best known of these is negative index of refraction, a property that allows
materials to bend light "the wrong way" and thus defy the laws of classical optics.

LIQUID CRYSTALS
Although they were discovered in the late 19th century and have been used in video
displays since the 1960s, liquid crystals can be thought of as an advanced 21st century
technology that somehow fell backward in time. They are essentially a fourth state of
matter, possessing some properties of a liquid and some of a crystalline solid. In
addition, they are "birefringent," meaning they have a different index of refraction,
depending on the angle or direction of light passing through them. They are capable of
serving as photonic crystals, and under the influence of light, heat, electric and
magnetic fields, and mechanical or chemical alignment layers, they can be rearranged
at a moment's notice so that their optical properties are transformed.
Today, people are accustomed to thinking of liquid crystals as pixels in a video display,
However, their capabilities extend far beyond this. With proper substrate design and
the application of electric fields and other alignment or disalignment mechanisms 1 liquid
crystals can be used to reversibly block, bend, focus, scatter, reflect, transmit, twist,
polarize, diffuse, and absorb light in limitless combinations.

4

UNCLASSIFIED/ /FOR 0551&:ilirllk W&lii &HI::¥

Page 9

UNCLASSIFIED/ j FOR OFFICIAL t,!E 9HLY

" Impossible" Materials
When natural materials are shaped and combined in macroscopic ways, it becomes
possible to produce what Roger Bacon described as "natural magic": devices such as
mirrors, lenses, polarizers, magnets, wires, semiconductors, fluorescent dyes, and
phosphorescent screens that glow in the dark. We take these devices for granted, but
to our primitive ancestors they would have seemed supernatural, as indeed they are in
the sense of not occurring naturally.
However, by combining the same materials in nanostructured ways, we achieve a
higher order of magic: Bragg mirrors that reflect a single wavelength while transmitting
all others, superlenses that defy Newton's diffraction limit to focus with unnatural
sharpness, superstrong magnets that measure the world around them with
unprecedented sensitivity, photoluminescent materials that absorb light in a broad
range of wavelengths and re-emit it in a single brilliant color. Soon we may have high­
temperature superconductors and even materials that are functionally invisible.
One such "impossible" material hypothesized is the nanostructured "metapolarizer."
Where classical polarizers either reflect or absorb half the light that hits them (typically
resulting in energy wastage of SO percent or higher), a metapolarizer simply ignores
one polarity of light and converts or rotates or "retards" the other. This principle can be
harnessed, for example, to double the battery life of a laptop display or to double the
brightness of a flat-screen TV.
However, even these magical materials are "static"; that is, their properties are fixed at
the time of manufacture. The greatest revolution in materials science may in fact come
from materials capable of changing their properties on demand.

Advantages of Dynamic Materials
Leaving behind the world of static materials, we come to a sort of programmable magic
whose fruits already include switchable mirrors, dynamic optical filters, deformable
lenses, magnets and polarizers that appear and disappear on command. Less
glamorous but equally important are such "behind the scenes" capabilities as tunable
electrical conductivity, tunable bandgap semiconductors, tunable lasers, and tunable
photonic crystals.
However, the ultimate exemplar of designer materials will be multifunctional smart
materials, which are capable not only of switching a particular property on and off but
of changing their properties-indeed, their very purpose-on demand.

5

UNCLASSIFIED/ /F9A 8FFUiiili11J11 Wiili 1'UILY

Page 10

UNCLASSIFIED/ /f8Ft 8ffHHIIII:. .-se 8Hl:.V

Power &
Control Signals
Figure 4. Wellstone Fiber. A notional "Wellstone" fiber uses careful arrangements of conductors, semiconductors,
and insulators to produce a long, flexible cylinder whose surface is studded with artiticial atoms. When woven
together, these fibers create a bulk material whose properties are programmable via external signals.

In the future, advanced supercomputers may be able to monitor the objects around
us-our desks, our countertops, our walls and windows and chairs-and modify their
properties to suit the needs of the moment. Transparent or opaque? Reflective or
absorptive? Conductive or insulating? Magnetic? Flexible? Luminous?
In theory, a block of true Programmable Matter should be able to select any point on
any of these axes at any time. Other effects may be desired as well, including
magnetoresistivity, photo-/thermo-/piezoelectric effects, superconductivity, and the
ability to perform computations (a truly "smart" smart material).
Unfortunately, many of these traits are strongly correlated, so that, for example, a
material that managed to be both electrically conductive and thermally insulative
probably could not be made transparent as well. A computer is unlikely to double as an
air conditioner. Still, the possible combinations-the number of things we could actually
do-would be much larger than the (already vast) range of natural material
com bi nations.
Although the smart matter of 2050 will probably be operated electrically, electrical
operation presents a number of challenges today. First, the required nanostructures are
very small and intricate, with manufacturing tolerances that push or exceed the limits
of current technology. Second, the control wires, electrodes, and other conductors in
such devices mean they will likely be vulnerable to electromagnetic interference. Like a
pocket calculator in a microwave oven, programmable materials face a harsh
electromagnetic environment and will need to be shielded and safeguarded against
spurious behavior. In addition, there is the threat of hackers. As our society turns over
the control of more and more infrastructure to computers, we add not only new
strengths but also new vulnerabilities. We must be extremely cautious about handing
malicious hackers the keys to matter itself!

6

,

UNCLASSIFIED/ 'FOR OEEIG'I0l 11 &:E $Ull¥

Page 11

UNCLASSIFIED/ /FOR OFFIGIJt.k W&li O~•kY

The greatest challenge, however, is temperature. The resistance of an electrical wire
varies with temperature, and while we scarcely notice the difference with the fat copper
wiring in our houses, the delicate films and nanowires of Programmable Matter smart
materials feel it very strongly. Other critical properties, such as the bandgaps of
semiconductors, the optical spacing of photonic crystals, and the internal symmetries of
liquid crystals, are also temperature sensitive and must be managed carefully to avoid
overwhelming the control signals passing through the material.
Early attempts at programmable quantum dot materials were so temperature sensitive
that researchers found that altering temperature, rather than the electric field, was
actually the easiest way to control the response of the materials . In fact, by selecting
materials with higher temperature sensitivity, we were able to enhance these effects to
produce thermally activated smart materials with no need for electric controls at all.
Of course, materials that respond to temperature are not new. Thermochromic (color­
changing) liquid-crystal thermometers are well known, and in the mid-1990s, Chinese
researchers developed a thermochromic paint that turns a cool-blue shade when warm,
a warm-red shade when cool, and pale green at room temperature. This was done
mainly for thermal regulation-the paint allegedly could increase the temperature of a
building by about 4°C in winter and decrease it by about s0 c in summer-although the
researchers also claimed an aesthetic benefit to having a home's color match the
season. Even more impressive effects could be achieved if black and white (or clear and
silver) were available color choices.
Although thermochromic building materials were very rare until recently, a number of
other mechanisms-including electrochromics, photochromics, and automatic
mechanical blinds-have been used to create "dynamic windows" that actively control
solar heat gain in buildings and display many of the properties (if not the principles) of
a true smart material. Buildings account for 40 percent of all energy consumed in the
United States, including 71 percent of all electricity and 38 percent of all carbon dioxide
emissions. Managing solar heat gain and controlling the building's thermal envelope are
the most effective ways of reducing energy use. The same principles apply, of course,
to spacecra~, for which solar heat is even more intense and nighttime (in the shadow of
the Earth) is colder.
In 2003, the U.S. Department of Energy's Lawrence Berkeley National Laboratory
(LBNL), on behalf of the American Society of Heating, Refrigeration, and Air
Conditioning Engineers (ASHRAE), performed a study focused on dynamic window
systems capable of darkening or shading automatically such that the solar heat gain
coefficient (SHGC) varied between 0.26 and 0.40. Analyses were performed for eight
U.S. cities: Boston, Denver, Jacksonville, Kansas City, Phoenix, Sacramento, Seattle,
and Washington, D.C.
The ASHRAE study found that across all eight climate zones, buildings with low­
emissivity ("low-E") glass saved an average of 8-15 percent on their total annual
energy (heating, cooling, and ventilation) costs, whereas the addition of dynamic
window systems saved an additional 6-19 percent. In other words, the savings
associated with a dynamic window are approximately as large as the savings associated
with low-E. Furthermore, because dynamic windows and low-E coatings save energy
7

UNCLASSIFIED//509 Q661CIOk '!&Ii QIUklf

Page 12

UNCLASSIFIED/ /f8R 8ffl811111: .-sE 8Hl:l/
through completely different mechanisms, their effects are complementary and, thus,
their savings can be combined. In addition, while low-E glass reduced peak cooling
loads by 2-14 percent, the dynamic windows provided an additional 5-38 percent
reduction in peak cooling load, allowing significant downsizing of the building's air
conditioning system.
The report concluded that dynamic windows "offer the potential for significantly greater
HVAC savings than can be achieved with currently available high-performance
windows," have "much lower energy costs than static windows," and "provide the best
of all worlds."

Early Commercialization of Smart Materials
In the third quarter of 2009, RavenBrick LLC introduced RavenWindow, an "active­
passive thermoreflective" window film that is transparent when cold and partially
reflective when hot. The dual-purpose smart film is intended to manage and harness
solar heat gain in windows. The film costs much less than do existing smart window
technologies and offers superior energy savings.

Figure 5. Assorted Views of RavenWindow and Ravenlight Filters in the Cold (Transparent) and Hot
(Reflective) State.

RavenWindow film is transparent when cold and partially reflective when hot,
allowing an SHGC range between 0.12 and 0.43-more than twice the range
studied by LBNL. Studies performed by RavenBrick using LBNL tools show
energy savings up to three times those of low-E glass alone.
8

UNCLASSIFIED/ /FOR AEFICl I k W&li &HI:¥

Page 13

UNCLASSIFIED/ /P'eR. 9P'P'!e!ftl t,91!! e.cc (

Denver Five-Year Cumulative Savings
(holding energy prices constant}
-

RavenWindow+ Low-E

-

Pilkington K-Glass

$3,000.00
$2,500.00
- - O!dcastle Sunglass

$2,000.00
$1,500.00

- -Viracon VR E238

$1,000.00
-

AFG Comfort TiR

$500.00

,
$-

0

12

24

36

48

60

Months Installed

---- 99% Transmissive Low­
E
------- 99% Reflective Low-E

Figure 6. RavenWindow Smart W indow Film Performance vs. Leading I ncumbent Window Filt ers.

Assuming a retail cost of $25 per square foot, for large buildings across multiple climate
zones, the payback period is 5-10 years. Even faster return on investment is possible if
the retail cost can be reduced, which seems likely given the relative simplicity of the
technology. The payback period does not include capital cost reduction on HVAC
systems, reduction in the cost of window coverings, and the tax and building permit
savings associated with Leadership in Energy Efficient Design (LEED) certification.

Thermal Management of Spacecraft
The three laws of thermodynamics, in their simplest form, are (1) you cannot win, (2)
you cannot break even, and (3) you cannot quit the game. Energy is never free, and
nanostructured dynamic materials are of course subject to the same laws as natural
materials. However, while energy can neither be created nor be destroyed, it can be
moved around, changed in form, and also stored. Thus, for thermal management of
spacecraft, dynamic materials have much more to offer than simply regulating solar
heat gain.
One example is active heat transport. A Peltier junction is a solid-state heat pump
made from two dissimilar semiconductors. When a current is passed through the
junction, one face grows hot while the other grows cold.

9

UNCLASSIFI ED/ /P'91l err1e1s11t l!l&E 8Hk¥

Page 14

UNCLASSIFIED/ /FOR OFFICIAL USE 014Lf

Hot Face

N-Type
Current In

Current Out
Cold Face

Figure 7. Peltier Junction Heat Pump. Running an electrical current through this device will drive thermal
energy into the upper conductor, which grows hot. The lower conductors lose energy and become cold. The same
principle works in reverse: heating the top conductor (or cooling the bottom one) will create an electrical voltage
across the device.

Unfortunately, natural materials are relatively poor at this-the best efficiencies
achieved with them so far are around 10 percent. An optimal thermoelectric material
would be simultaneously a strong electrical conductor-perhaps even a
superconductor-and an excellent thermal insulator.
Fortunately, in 2001, scientists at the Research Triangle Institute in North Carol!na used
semiconductor superlattices to create a Peltier junction that operated at 2.5 times the
efficiency and 23,000 times the speed of all previous designs. The electrically
semiconductive superlattice materials were unusually good radiators-and unusually
poor conductors-of heat.
For spacecraft hulls fashioned from programmable materials, it should be possible to
create Peltier coolers on any surface in order to pump heat out of one area and divert it
to another. In addition, it may be desirable to manipulate the thermal conductivity of
the spacecraft skin-highly conductive in some areas, highly insulating in others-either
to smooth out temperature differences between the sunward and shadowed sides of the
spacecraft or, in some cases, to accentuate them (for example, so that a radiator,
precision blackbody, or cryogenic instrument on the shadowed side remains as cold as
possible).
Finally, it may be desirable to store heat for later release . This can be accomplished, for
example, by placing an insulating barrier around a hot portion of the spacecraft skin
while also reducing the emissivity of the hot spot so its ability to radiate the heat away
into space is minimized. Later, the hot spot can be reconnected to the rest of the
spacecraft skin through conductive bridges, allowing the heat to escape and spread out.
In addition, thermal management of the spacecraft interior will provide significant
benefits for the overall energy budget. The table below details the energy consumption
of a typical household (a reasonable analog for a crewed spacecraft, with the exception
of energy required for air circulation and other life support functions) .

10

UNCLASSIFIED/ fFOA QFFICI.t.k Wili 81Uklf

Page 15

UNCLASSIFIED/ /1'91t err1e11111:: W&I &Hkl/
Table 1. Daily Household Energy Consumption (USA, 1993-1997)
Space Heating
Water Heating
Refrigeration
Space Cooling (air conditioner)
Lighting
Clothes Drying
Cooking
Dishwashing
Other Appliances (TV, stereo, computer, etc.)

41 kWh
15 kWh
7 kWh
3kWh
3kWh

2kWh
lkWh
lkWh
?kWh

Over 80 percent of the energy budget is spent heating and cooling things-often at the
same time. It is clearly desirable to recapture the waste heat from cooling operations
and divert it to subsystems, such as the water heater.

Energy- Scavenging Spacecraft Skins
Programmable materials can also be used to harvest, store, and redirect other forms of
energy. Spacecraft are constantly bathed in a very high solar energy flux and
experience sharp temperature gradients, as well as periodic changes in magnetic and
electric field, All of these represent possible energy sources that can be scavenged from
the environment without disrupting other spacecraft operations.
The photoelectric effect occurs when photons strike a material such as a semiconductor
or metal. The energy of the photons is absorbed by the electron shells of atoms, and as
a result, some electrons may shift from the valence band to the higher, looser energies
of the conduction band. This is the source of the voltage in photovoltaic cells and allows

Text continues in the original file (20 pages).

Previous: DOW-UAP-D117 — AAWSAP DIRD, Metallic Glasses for Aerospace Applications, December 2009 · Next: DOW-UAP-D119 — AAWSAP DIRD, Biomaterials, January 2010

Same topic: title & summary match

Same location: Las Vegas, Nevada

Same period: 2009

Same release: Release 06

Same agency: DoW