Home › Archive › AARO

ORNL Synopsis Analysis of a Metallic Specimen

File AARO-ORNL-Synopsis_Analysis_of_a_Metallic_Specimen is a declassified pdf from AARO. This page carries the original file, its official summary and its full text.

File
AARO-ORNL-Synopsis_Analysis_of_a_Metallic_Specimen
Agency
AARO
File type
PDF

Open original file · AARO.MIL page

TL;DR

Turns out 1947's hottest new material was just ordinary metal.

  • ORNL Synopsis Analysis of a Metallic Specimen, AARO pdf, examines 1947 crash material.
  • Specimen contains Mg, Zn, Bi, Pb; terahertz waveguide test negative; isotopes terrestrial.
  • Terrestrial origin confirmed; no anomalous waveguide performance.

AI summary

A document from Oak Ridge National Laboratory (ORNL) analyzes a metallic specimen linked to a 1947 unidentified aerial phenomenon crash. The specimen, composed of magnesium, zinc, and bismuth, was evaluated for terahertz waveguide properties, with results indicating a terrestrial origin and no evidence of waveguide functionality. Additional elemental and isotope analysis confirmed the presence of lead, bismuth, and zinc, with magnesium and lead isotope data supporting a terrestrial origin. The document includes references from scientific journals and authors, with publication dates ranging from 1956 to 2022.

Full text

Page 2

Introduction
The All-Domain Anomaly Resolution Office (AARO) sponsored a series of measurements on a layered material
specimen primarily composed of magnesium and zinc, with bands of bismuth and other co-located trace elements.
The material specimen, whose origin and purpose are of long and debated history, is claimed to be recovered
from an unidentified anomalous phenomenon (UAP) crash in or around 1947. Furthermore, the specimen's
physiochemical properties are claimed to make the material capable of "inertial mass reduction" (i.e., levitation or
antigravity functionality), possibly attributable to the material's bismuth and magnesium layers acting as a terahertz
waveguide.
Previously, US Army Combat Capabilities Development
Command (DEVCOM) established a Cooperative
Research and Development Agreement (CRADA) with
To the Stars Academy (TTSA) to evaluate the feasibility
of exploiting any potential disruptive technology
associated with this widely discussed specimen.
AARO, founded in 2022, is congressionally mandated to
explore historical records of UAP incidents and publicly
report its findings. Although the long chain of custody
for this specimen cannot be verified, public and media
interest in the specimen warranted a transparent
investigation that adhered to the scientific method.
Subsequent to the TTSA-DEVCOM CRADA, AARO
secured science and technology partner Oak Ridge
National Laboratory (ORNL), one of 17 US Department
of Energy national laboratories, to independently
assess and perform thorough characterization studies
on the specimen, leveraging ORNL's 80-year history of
Figure 1. View of the as-received bulk specimen. Sticker
world-leading materials science expertise. containing internal sample tracking information edited out
for public release.
ORNL, an expert in materials characterization, has the
diverse staff expertise and co-located, powerful instrumentation suites to allow rigorous scientific inquiry beyond
the capabilities of most individual laboratories. Therefore, it is a highly qualified institution to maintain scientific
integrity in its unbiased analysis of this specimen and its properties.
AARO tasked ORNL with assessing whether (1) the specimen is of terrestrial origin and (2) the bismuth in the
specimen could act as a terahertz waveguide. DEvcoM Ground Vehicle System Center provided ORNL access
to the metallic specimen-a single parent sample and three previously derived subsamples, all from the same
material—beginning in February 2023.
ORNL materials science analyses evaluated the sample's structure, chemical composition, and isotope ratios via
multiple methods, including microscopy, spectroscopy, and spectrometry. Results align with previous DEvcOM
analyses, indicating that the structure and composition of the bismuth layers do not meet the requirements
necessary to serve as a terahertz waveguide. Furthermore, all data strongly support that the material is terrestrial
in origin.
Synopsis: Analysis of a Metallic Specimen 1

Page 3

Methods
All analyses and materials utilization were authorized and overseen by TTSA via the DEvCOM CRADA, and all
analyses were preapproved by AARO and DEVCOM before ORNL received the specimen.
Morphology and microstructural characteristics were investigated using the following techniques.
• Optical microscopy: standard microscope analysis that allows imaging of microstructural features.
• Computerized tomography, aka CT scan: X-ray imaging procedure that produces a 3D image of a sample
without damaging it, revealing interior structural features.
. Scanning electron microscopy-energy dispersive x-ray spectroscopy (SEM-EDS): technique that produces 2D
images at higher resolution to allow analysis of microstructure and elemental makeup.
• (Scanning) transmission electron microscopy-energy dispersive x-ray spectroscopy ([s]TEM-EDS): a suite
of techniques that pass a high-energy (e.g., 200 kV) electron beam through a thin (<200 nm) foil of sample,
allowing analysis of crystal structure, grain and feature morphology, and defects, as well as elemental
makeup, all with nanometer to subnanometer resolution.
Analyses of bulk chemical, elemental, and isotopic composition used mass spectrometry techniques, a suite of
widely used analytical techniques that identify elements, their abundance within a sample (including very trace
quantities), and their isotopic composition.
Traceable quality control standards and method blanks were run throughout all analyses to monitor sample integrity
and instrument performance.
Results
Morphology and Structure
Data are consistent across multiple imaging approaches,
showing that the material consists of distinct layers
that merge and diverge at various points throughout the
material.
Interfaces showed fractures and other features that
ORNL determined are consistent with a material that was O o
originally whole but was strained by heat exposure and
mechanical forces, possibly for extended periods. Figure
2 shows images of the specimen constructed using CT.
Table 1. Trace element
ELEMENT AVERAGE composition of the
Bi 3813 specimen (sans the Figure 2. Images produced via CT showing multiple
Pb 2859 bulk magnesium-zinc angles of the bulk specimen, showcasing features
TI 215.13 matrix), in decreasing including the layer nature of the material (bottom left)
order of abundance. and edge with probable heat damage (bottom right).
Fe 55.1 All are considered
Cd 36.96 "trace," at less than
Chemical Composition
Mn 28.99 0.1% abundance. Gray
reflects results from Analysis using SEM-EDS determined that magnesium
Au 10.618 and zinc are the primary elements present in the
Mo 0.5922 inductively coupled
plasma optical specimen, comprising approximately 97.5% and 2%
Sn 0.1328 emission spectroscopy of the material, respectively. Minor elements detected
Ba 0.0465 (ICP-OES); Blue reflects (Table 1) were lead (Pb) and bismuth (Bi) (Figure 3),
Units: trace elements are in parts per million results from high-
(micrograms per gram of sample) resolution ICP-MS. with lesser trace amounts of iron (Fe) and manganese
Synopsis: Analysis of a Metallic Specimen 2

Page 4

(Mn). Inductively coupled plasma mass spectrometry (ICP-MS), the most sensitive analysis technique performed,
additionally revealed the presence of small amounts of cadmium (Cd), thallium (Tl), gold (Au), molybdenum (Mo),
tin (Sn), and barium (Ba). If a detected element abundance fell beneath the lower bound of the calibration curve or
below the method detection limit, then the element is not displayed in Table 1 because that element was extremely
unlikely to have been a purposeful addition to the manufacturing process.
BSE C Wt% Mg Wt%
200 μm
100 100
50 50
0 0
Zn Wt% Pb Wt% Bi Wt%
5
5 5
0 0
Figure 3: Backscattered electron image (BSE, top left) and energy dispersive x-ray spectrometry (EDS) maps
from one subsample (SEM beam energy: 30 kV), presented as estimated weight percent (minor elements not
shown, so numbers will not total 100%). Carbon (C) map indicates the embedding epoxy. The magnesium
matrix (Mg) is clearly visible, along with the cracks in the matrix. The zinc (Zn) map shows regions of higher
and lower zinc content. At the top of the lead (Pb) and bismuth (Bi) maps, co-located layers are visible.
(Figure 5 presents additional imaging of the banded element composition, showing multiple Pb-Bi layers.)
Crystalline Structures
TEM revealed that the crystalline structure of magnesium in the specimen was consistent with common magnesium
alloy structures (Figure 4). Laser ablation ICP-MS revealed banding of the zinc components, along with layered co-
location of lead and bismuth (in an approximate 1:1 ratio) in the bands. The bismuth-rich portions of the specimen
lacked a clear crystalline structure, instead appearing to consist of highly nanocrystalline pockets in an otherwise
amorphous matrix (Figure 4).
Pure single-crystalline bismuth in a single thin layer has been postulated to have the ability to function as a waveguide,
a material that can disrupt or direct an electric or energy field—in this case, terahertz waves (electromagnetic waves
with microscale wavelengths). Although the damage to the specimen (including suspected heat stress) precludes
a definitive statement describing the specimen's original structure, the amorphous and nanocrystalline appearance
of the bismuth in the examined layers of the current specimen likely indicates that a pure crystalline layer of bismuth
was never present within the material.
Moreover, the postulated structure of such a theoretical bismuth-based waveguide requires it to be in a single
layer between a material possessing a different dielectric constant. However, multiple bismuth layers throughout
a material have not been postulated to be capable of achieving or improving this waveguide functionality—in fact,
multiple layers could instead interfere with such functionality. Thus, the layered nature of the impure bismuth within
the specimen likely precludes it from acting as a waveguide (Figure 5).
Synopsis: Analysis of a Metallic Specimen 3

Page 5

Finally, based on the postulated hypothetical uses of bismuth, the dielectric properties necessary for bismuth to
function as a waveguide would have been disrupted in this material because the bismuth in the specimen is co-
located and mixed with lead (Figures 3 and 5). Based on these findings ORNL determined that this material is highly
unlikely to have ever functioned as a bismuth-based terahertz waveguide.
(a) (b)
4224 4312
4400
3036 3124
3212 3300
3412
2136 2024
2112 2200
2312 242
1236 1124
1012 1100
1212 1324
0336 0224
0112 0000
0 0112 0224
1324 1212
1100 1012
1124 12
2424 2312
2200 2112
2024 2136
3412 3300 3212
3124 3036
4400 4312
4224
5 μm 5 nm-1
(d) Bi2O3
γ =3.0
18168 CE1R
2170 2202
2204
3300
5 µm 5 nm1
Bi
Figure 4: (a) TEM micrograph of a single-crystalline region from the bulk of the sample; structural defects are visible at
this level of resolution (this figure is showing an area that represents just 2 to 3 pixels of the area shown in Figure 3). The
vertical lines at the bottom are a focused ion beam preparation artifact. (b) Selected area electron diffraction pattern
(SAEDP) from the region in (a), indexed to the standard Mg structure. (c) A low-magnification montage TEM micrograph
of an area showing a dense bismuth-rich layer (dark central band). (d) A SAEDP from a bismuth-rich band. The electron
diffraction pattern (with image processing y=3.0) from the bismuth-rich region is shown in the white rings. Both bismuth
(Bi, yellow) and Bi,O3 (red) calculated ring patterns are shown for comparison; Bi is a slightly better match. The diffraction
indicates that the bismuth layer is nanocrystalline and highly defective.
Synopsis: Analysis of a Metallic Specimen 4

Page 6

Pb Bi
mm
Zn
Figure 5. Laser ablation ICP-MS elemental maps. (Top) Colocation of lead (green), bismuth (blue), and zinc (red), the three
primary minor elements in the material. Blending of colors indicates co-location: teal indicates the nearly 1:1 ratio of lead
to bismuth. (Bottom) Elemental map of bismuth concentration (hot [yellow] = more, cool [purple] = less). Bismuth is most
concentrated at the top but is present in many repeating layers.
Isotope Analysis
Multicollector ICP-MS analysis showed that the specimen's magnesium and lead isotope composition is consistent
with other materials manufactured and used terrestrially (Figures 6 and 7). Isotopes are varying forms of the same
element with differing mass, and their proportions affect the chemical properties of and reveal information about
the history of the material within which the isotopes are found. All elements have isotopes, and the ratio between
the amounts of various isotopes is called the isotopic signature, which is akin to a fingerprint in chemical analyses.
The magnesium isotopic signature of the specimen is fractionated (possibly owing to the mechanical and heat
strain that the material appears to have undergone) but falls within normal terrestrial compositions and precisely
within the expected trendlines of fractionation (Figure 6). Each star system has a magnesium isotopic composition
that was inherited from its local star-forming region. Figure 6 shows the magnesium isotopic signature of various
materials originating within our solar system. The straight lines in the bottom graphic representation are the kinetic
and equilibrium mass fractionation trendlines, which define the types of isotopic shifts incurred on the basis of
mass. Fractionation occurs due to chemical reactions and physical processes (e.g., manufacturing and mining)
and is normal during the lifespan of natural and manufactured materials and their components. The materials in
Figure 6—including the specimen-fall on or near the fractionation trendlines, strongly indicating that their starting
compositions were once the same and have been systematically changed as a result of mass fractionation. If a ma-
terial originated outside our solar system, its magnesium isotopic signature could plot nearly anywhere in the top
graphic representation of Figure 6—instead, the specimen's data plots it precisely within the expected fractionation
trendlines for known compositions specific to our solar system.
Less complexly, the lead isotopic signature of this specimen is fully consistent with "common lead" compositions
that exist naturally on Earth and within terrestrial materials (Figure 7), distinctly separate from even lunar materials,
indicating it is extremely likely that the material originated on Earth.
Synopsis: Analysis of a Metallic Specimen 5

Page 7

-400

-200

0

200

UP TO 1400

400

-200

200

0

UP TO 1,000

δ25Mg (‰)

0

UP TO 5.0 X 105
UP TO 1.5 X 106
UP TO 5.0 X 105
Graphite HD - low metal AGB

-200

200

Graphite LD - Super Nova
Group 1 - low to intermediate mass Red Giant or AGB star

UP TO 750

Group 2 - low/very low-mass AGB star
Group 3 - low mass, low metallicity

δ26Mg (‰)

-400

Group 4 - Super Nova

400

0

4

δ25Mg (‰)
2
0
-8
-4
-6
-8
-10

δ26Mg (‰)

-12
-22

-17

-12

-7

-2

Equilibrium fractionation

Meteorites

Seawater

DOW metal

Kinetic Fractionation

Sample A

Manufactured metal

NASA JSC metal

Earth

Aerospace metal

Brazilian specimen

0

Figure 6: Artistic representation including the magnesium isotope systematics of the unknown material, specifically shown
relative to other terrestrial, non-terrestrial, and extrasolar materials. The figures plot the δ26Mg′ vs. the δ25Mg′, which represent
the differences in 26Mg/24Mg and 25Mg/24Mg isotopes relative to a known standard (DSM-3) in parts per thousand (‰)
notation. This calculation adjusts for known instrumental mass bias effects inherent in ICP-MS analyses and is consistent
with how magnesium data in literature are often presented. (Top) The extreme magnesium isotope compositions possible
from different star types. (Bottom) A zoomed-in view of the magnesium isotope compositions of local solar system
materials and the material in question. Uncertainty envelopes are not included, but when plotted with their uncertainties,
data points overlap the kinetic and equilibrium fractionation lines. (Note: Data points shown with a diamond shape, included
for completeness, were extracted from an older analysis source; we cannot directly verify the precision or correctness of
these data. The delta values were calculated relative to DSM-3, and a systematic offset correction factor was applied; error
bars for these points reach ± 2 ‰ uncertainty.)

Synopsis: Analysis of a Metallic Specimen

6

Page 8

1.400
1.200
•
1.000
0.800 207Pb/206Pb
0.600
0.400
0.200
204Pb/206Pb
0.000
0.000 0.020 0.040 0.060 0.080 0.100 0.120
Sample A
Silver Coins SRM-982 measured
Industrial Pb SRM 982
Galena O SRM 981
Airborne Particulate Matter SRM 983
Feldspars Pacific Ocean Sulfides
Meteorite Troilite Lunar Glasses
0 Mars Gasoline
Figure 7. Lead (Pb) isotope systematics of the unknown material, shown relative to other terrestrial and non-terrestrial
materials in 206Pb/204Pb vs. 207Pb/206Pb. This plot has three end-member compositions: (1) primordial lead, which is the
starting composition of the lead in the solar system; (2) pure radiogenic lead from the decay of naturally occurring uranium;
and (3) terrestrial lead or "common lead," which is defined by repeat analyses. The specimen has a lead isotopic composition
that plots precisely in the field of terrestrial lead compositions. SRM stands for standard reference material, materials
typically used to perform instrument calibrations due to their well-characterized composition or properties, as measured
and certified by the U.S. Department of Commerce's National Institute for Standards and Technology.
Synopsis: Analysis of a Metallic Specimen

Page 9

Conclusion
AARO secured ORNL to independently assess the requirements necessary to confirm or contest public claims
that this historical specimen is of non-terrestrial origin and that it is capable of functioning as a bismuth-based
terahertz waveguide. Although the origin, chain of custody, and ultimate purpose of this specimen remain unclear,
a modern and robust analysis of its chemical and structural composition and properties does not indicate that its
origin is non-terrestrial, nor do the data indicate that the material examined ever had the pure single-crystalline
bismuth layer that could possibly have acted as a terahertz waveguide. The intended or actual past use of the
material remains undetermined, but ORNL has a high level of confidence that all data indicate the material was
manufactured terrestrially—albeit using an uncommon mixture of elements by today's standards—and then incurred
damage caused by mechanical and heat stressors.
References
Akram, W.; Schönbächler, M., Zirconium isotope constraints on the composition of Theia and current Moon-
forming theories. Earth Planet Sc Lett 2016, 449, 302-310.
2 Albarede, F.; Blichert-Toft, J.; Gentelli, L.; Milot, J.; Vaxevanopoulos, M.; Klein, S.; Westner, K.; Birch,
T.; Davis, G.; de Callatay, F., A miner's perspective on Pb isotope provenances in the Western and Central
Mediterranean. J Archaeol Sci 2020, 121.
3. Blichert-Toft, J.; Zanda, B.; Ebel, D. S.; Albarède, F., The Solar System primordial lead. Earth Planet Sc Lett
2010, 300 (1-2), 152-163.
4. Budde, G.; Tissot, F. L. H.; Kleine, T.; Marquez, R. T., Spurious molybdenum isotope anomalies resulting from
non-exponential mass fractionation. Geochemistry-Germany 2023, 83 (3).
5. Catanzaro, E. J.; Murphy, T. J.; Shields, W. R.; Garner, E. L., Absolute Isotopic Abundance Ratios of Common
Equal-Atom and Radiogenic Lead Isotopic Standards. J Res Nbs a Phys Ch 1968, A 72 (3), 261-+.
6 Chakrabarti, R.; Jacobsen, S. B., The isotopic composition of magnesium in the inner Solar System. Earth
Planet Sc Lett 2010, 293 (3-4), 349-358.
Connelly, J. N.; Bizzarro, M.; Thrane, K.; Baker, J. A., The pb-pb age of angrite SAH99555 revisited. Geochim
Cosmochim Ac 2008, 72 (19), 4813-4824.
8. de Vega, C. G.; Chernonozhkin, S. M.; Grigoryan, R.; Costas-Rodríguez, M.; Vanhaecke, F., Characterization
of the new isotopic reference materials IRMM-524A and ERM-AE143 for Fe and Mg isotopic analysis of
geological and biological samples. J Anal Atom Spectrom 2020, 35 (11), 2517-2529.
9 Fouquet, Y.; Marcoux, E., Lead-Isotope Systematics in Pacific Hydrothermal Sulfide Deposits. J Geophys Res-
Sol Ea 1995, 100 (B4), 6025-6040.
10. Gyngard, K. M. H. a. F., The Presolar Grain Database. In 40th Lunar and Planetary Science Conference, 2009.
11. − Higgins, J. A.; Schrag, D. P., Records of Neogene seawater chemistry and diagenesis in deep-sea carbonate
sediments and pore fluids. Earth Planet Sc Lett 2012, 357, 386-396.
12. Hoppe, P.; Leitner, J.; Kodolányi, J.; Vollmer, C., Isotope Systematics of Presolar Silicate Grains: New Insights
from Magnesium and Silicon. Astrophys J 2021, 913 (1).
13. Hulston, J. R.; Thode, H. G., Variations in S33 S34 and S36 Contents of Meteorites and Their Relation to
Chemical and Nuclear Effects. J Geophys Res 1965, 70 (14), 3475-+.
14. Kammerer, C. C.; Kulkarni, N. S.; Warmack, R. J.; Sohn, Y. H., Interdiffusion and impurity diffusion in
polycrystalline Mg solid solution with Al or Zn. J Alloy Compd 2014, 617, 968-974.
15. Karl K. Turekian, H. D. H., Presolar Grains. In Treatise on Geochemistry, 2 ed.; 2013.
16. Kodolányi, J.; Hoppe, P.; Gröner, E.; Pauly, C.; Mücklich, F., The Mg isotope composition of presolar silicate
grains from red giant stars. Geochim Cosmochim Ac 2014, 140, 577-605.
17. Leitner, J.; Hoppe, P., A new population of dust from stellar explosions among meteoritic stardust. Nat Astron
2019, 3 (8), 725-729.
18. Leonid V. Alekseyev, V. A. P., and Evgenii E. Narimanov, Homogeneous Hyperbolic Systems for Terahertz and
Far-Infrared Frequencies. Advances in OptoElectronics 2012, (Modern Trends in Metamaterial Applications), 6.
19. Liu, N.; Dauphas, N.; Cristallo, S.; Palmerini, S.; Busso, M., Oxygen and aluminum-magnesium isotopic
Synopsis: Analysis of a Metallic Specimen 8

Page 10

systematics of presolar nanospinel grains from Cl chondrite Orgueil. Geochim Cosmochim Ac 2022, 319, 296-
317.
20. Lubecke, V. M.; Mizuno, K.; Rebeiz, G. M., Micromachining for terahertz applications. LEEE T Microw Theory
1998, 46 (11), 1821-1831.
21. Monna, F.; Lancelot, J.; Croudace, I. W.; Cundy, A. B.; Lewis, J. T., Pb isotopic composition of airborne
particulate material from France and the southern United Kingdom: Implications for Pb pollution sources in
urban areas. Environ Sci Technol 1997, 31 (8), 2277-2286.
22. Moriwaki, R.; Usui, T.; Tobita, M.; Yokoyama, T., Geochemically heterogeneous Martian mantle inferred from
Pb isotope systematics of depleted shergottites. Geochim Cosmochim Ac 2020, 274, 157-171.
23.I Nemchin, A. A.; Whitehouse, M. J.; Grange, M. L.; Muhling, J. R., On the elusive isotopic composition of lunar
Pb. Geochim Cosmochim Ac 2011, 75 (10), 2940-2964.
24. Nguyen, A. N.; Messenger, S., Resolving the Stellar Sources of Isotopically Rare Presolar Silicate Grains
through Mg and Fe Isotopic Analyses. Astrophys J 2014, 784 (2).
25. Patterson, C., Age of Meteorites and the Earth. Geochim Cosmochim Ac 1956, 10 (4), 230-237.
26. Rutledge, D. B.; Schwarz, S. E.; Hwang, T. L.; Angelakos, D. J.; Mei, K. K.; Yokota, S., Antennas and Wave-
Guides for Far-Infrared Integrated-Circuits. LEEE J Quantum Elect 1980, 16 (5), 508-516.
27.9 Song, Q.; Chen, H.; Zhang, M.; Li, L.; Yang, J. B.; Yan, P. G., Broadband electrically controlled bismuth
nanofilm THz modulator. Apl Photonics 2021, 6 (5).
28.9 Stacey, J. S.; Kramers, J. D., Approximation of Terrestrial Lead Isotope Evolution by a 2-Stage Model. Earth
Planet Sc Lett 1975, 26 (2), 207-221.
29.9 Steele, R. C. J.; Elliott, T.; Coath, C. D.; Regelous, M., Confirmation of mass-independent Ni isotopic variability
in iron meteorites. Geochim Cosmochim Ac 2011, 75 (24), 7906-7925.
30.9 Sturrock, P., Composition analysis of the Brazil magnesium. Journal of Scientific Exploration 2001, 15 (1), 69-
95.
31. Tatsumoto, M.; Knight, R. J.; Allegre, C. J., Time Differences in Formation of Meteorites as Determined from
Ratio of Pb-207 to Pb-206. Science 1973, 180 (4092), 1279-1283.
32. Teng, F. Z., Magnesium Isotope Geochemistry. Rev Mineral Geochem 2017, 82, 219-287.
33. Timmes, F. X.; Woosley, S. E.; Weaver, T. A., Galactic Chemical Evolution - Hydrogen through Zinc. Astrophys J
Suppl S 1995, 98 (2), 617-658.
34. Vermeesch, P., IsoplotR: A free and open toolbox for geochronology. Geosci Front 2018, 9 (5), 1479-1493.
35. Wakaki, S.; Tanaka, T., Stable isotope analysis of Nd by double spike thermal ionization mass spectrometry. Int
J Mass Spectrom 2012, 323, 45-54.
36. Wang, T.; Schwarz, S. E., Design of Dielectric Ridge Waveguides for Millimeter-Wave Integrated-Circuits. LEEE
T Microw Theory 1983, 31 (2), 128-134.
37. White, W. M., Chapter 8: Stable Isotope Theory. In Isotope Geochemistry, 2014; p 720.
38. Wombacher, F.; Eisenhauer, A.; Heuser, A.; Weyer, S., Separation of Mg, Ca and Fe from geological reference
materials for stable isotope ratio analyses by MC-ICP-MS and double-spike TIMS. J Anal Atom Spectrom
2009, 24 (5), 627-636.
39. Young, E. D.; Galy, A., The isotope geochemistry and cosmochemistry of magnesium. Geochemistry of Non-
Traditional Stable Isotopes 2004, 55, 197-230.
40. Young, E. D.; Galy, A.; Nagahara, H., Kinetic and equilibrium mass-dependent isotope fractionation laws in
nature and their geochemical and cosmochemical significance. Geochim Cosmochim Ac 2002, 66 (6), 1095-
1104.
Synopsis: Analysis of a Metallic Specimen 9

Same topic: title & summary match

Same agency: AARO