AARO Aluminum Materials Analysis Supplement Jan2026
File AARO-AARO_Aluminum_Materials_Analysis_Supplement_Jan2026 is a declassified pdf from AARO. This page carries the original file, its official summary and its full text.
- File
- AARO-AARO_Aluminum_Materials_Analysis_Supplement_Jan2026
- Agency
- AARO
- File type
Open original file · AARO.MIL page
TL;DR
Turns out it’s just soda-can metal, not space tech.
- AARO report, Jan 2026, analyzes Ohio 1990s aluminum specimen.
- Specimen is ordinary alloy, shows casting defects, no radioactivity.
- No official conclusion in the file
AI summary
AARO Aluminum Materials Analysis Supplement Jan2026 is a report from the All-domain Anomaly Resolution Office, dated January 2026. It supplements Oak Ridge National Laboratory’s analysis of an aluminum specimen recovered near Flint Ridge State Park, Ohio, in the mid-1990s. The report states the specimen is an ordinary aluminum alloy, consistent with common industrial materials, and lacks features of high-performance alloys. ORNL found casting defects and no radioactive emissions. AARO concludes the specimen likely originated from a conventional manufacturing process, such as a commercial casting or industrial by-product.
Full text
Page 1
All-domain Anomaly Resolution Office
Supplement to Oak Ridge National Laboratory’s Analysis of an Aluminum Specimen
January 2026
Overview
In 2024, the All-domain Anomaly Resolution Office (AARO) contracted Oak Ridge National
Laboratory (ORNL) to evaluate a metallic specimen. This specimen, reportedly recovered from a
private property near Flint Ridge State Park, Ohio, in the mid-1990s, allegedly possessed
anomalous compositional and structural characteristics. The property owner reported observing a
large unidentified airborne object before discovering the material.
ORNL assessed that the specimen, as received, is consistent with “an ordinary aluminum alloy
made for common applications.” As a standard handling precaution, ORNL tested the specimen
for radioactive emissions and found none. ORNL produced a summary of findings documenting
the laboratory’s methodology, available on AARO’s website. AARO concurs with ORNL’s
findings and provides this supplementary material to add historical context to account for the
specimen’s probable origins.
Historical Context and Probable Origins
ORNL’s testing revealed large grain sizes, interconnected pores up to 1 millimeter in diameter,
and needle-like silicon precipitates. These features align with casting defects and failure patterns
commonly documented in industrial settings,1 all of which compromise the specimen’s
mechanical strength.2 The specimen also lacks strengthening additives, such as strontium or
sodium, which would be expected features in a high-performance alloy.3, 4 The specimen’s
overall form factor does not exhibit any geometry suggesting a functional design or particular
intended application. Taken together, these features are inconsistent with those of a component
designed for an advanced application.
AARO cannot definitively attribute the specimen to a specific source or manufacturing process.
However, its composition is comparable to well-documented, conventionally manufactured
aluminum-silicon alloys, most closely matching Aluminum Association reference materials for
alloys 369.1 and A413.1.5 Cast aluminum alloys in the 300- and 400-series are highly suitable for
applications that require hardness, impact resistance, and ease of processing into complex form
factors, such as engine components.6 300-series aluminum alloys began widespread industrial
production in the 1970s and now comprise over 90% of all shaped aluminum castings.7 These
finding are consistent with several plausible historical origins, including: a commercial casting;
an industrial by-product; a recycled alloy from a non-industrial casting; or a slow-cooling melt
resulting from a catastrophic failure of an original component, e.g., an automotive fire. Given its
1
26-P-0218
Page 2
consistency with contemporary alloys and incompatibility with high-performance applications,
AARO assesses that the specimen is most likely an ordinary, conventionally manufactured
aluminum alloy.
Jolly, M., & Katgerman, L. (2022). Modeling defects in aluminum cast products. Progress in Materials Science.
https://doi.org/10.1016/j.pmatsci.2021.100824
2
Davis, J.R. (2001). Alloying: Understanding the Basics (1st ed., p. 378). ASM Intl. Available online: Aluminum
and Aluminum Alloys
3
Ibid. (pp. 392-395)
4
Ganesh, M.R.S., Reghunath, N., J.Levin, M. et al. Strontium in Al–Si–Mg Alloy: A Review. Met. Mater. Int. 28, 1–
40 (2022). https://doi.org/10.1007/s12540-021-01054-y
5
Davis, J.R. (2001). Alloying: Understanding the Basics (1st ed., pp. 365-366, 404). ASM Intl. Available online:
Aluminum and Aluminum Alloys
6
Ibid. (pp. 365-366)
7
Ibid. (p. 354)
1
2
26-P-0218